Leaderboard

Here's my XJ6 s 2012 I bought recently. Only 1,750 miles on the clock! It's a great ride, excellent condition really comfortable and pretty quick. I think I'll be keeping this one for a while...

Happy easter everybody

Hello, I've been a yammy man for a long time, since my first 350YPVS back in the very early nineties, I've built countless specials over the years and more recently I've been working through my bucket list, buying tired but low mileage cosmetically challenged bikes and restoring them back to mint original perfection, doing everything myself in my domestic garage, fabrication, plating, painting everything. I've always loved the unloved underdog, nothing better than stuffing an underpowered bike past a wobbly sunday barstool racer on his 'superbike' So I'd been half looking for a SZR660, they've always interested me, a nice single in a small light good handling chassis, the potential is there, just that Belgarda made a dogs breakfast of packaging it. Then a bike popped up on ebay, yeah the fairing was fitted all wrong and looked awkward but it already had a few desirable bits for the special I already had visualised and more importantly was much cheaper than the overpriced original bikes that dreamers on ebay seem to think are desirable. As soon as it arrived it was stripped and the project started.... First up get that fairing off and suddenly it looked much lighter The look I'm going for is naked, stripped down, lightweight - taking styling cues from the SDR200 and R-1Z, now the seat unit looked way too big as well so that came off as well, and then the engine came out and it was much lighter Few hours later and I was down to the starting point of a bare frame. I have a TIG but have never done any ally work so this was the chance to learn.....

Now that I've sorted myself out (didn't realise I had to become a member to get the "attach" option), here's a couple of pics of me and the FJ from a ride out a couple of weeks ago.

Oh. Dofus. Yoc remember. Should say 600 fazer. No gold star for you...

ponderosa was quiet and found a great new cafe too wasn't till i got on the m6 that it was busy

Two wives decided on a girlie night out. On the way home they needed a pee and nipped into a graveyard. Then they realised that they didn't have any wipes to finish up, so the first one used her knickers, and the second one found a wreath and used that. The next day one husband rang the other and said 'No more girlie nights out, mine came home with no knickers on'. The other said, 'Well if you think that's bad mine came home with a card in her crack that said 'From all of us at the fire station - we'll never forget you.''

after being blocked out for years I am back good new or bad ? thanks for sorting it Alex

Yamaha came through! They just e-mailed me the Service Manual. I am now the happy owner of mystical torque specs

I couldn't find a 'middle finger' emoji, so...

Ok if it's going to be shit weather then let's leave it till it get's better, as Tommy said Stafford show might be fun anyway for a quick trip out and if some of us meet up there we can talk about it then.

See that's why nothing gets sorted. Your to hard to please PS the emojis have gone shit on here since I was last on, I was looking for the banana man wanking but he's gone

Hi Neo all sorted now had to adjust spring length but all working good now. Cheers Graham

Hi merv,, good to see your Back,,,, be good to hear from others, se if theyre still alive,

Yeah Mike, it seemed impossible until I realised you have to take up a paid membership to get the Attach Files option. I actually didn't even realise there was such a thing as the paid membership until this - maybe it was just me not paying attention, or maybe I missed something. TBH I really don't mind this, it's much better than paying a hosting service and it costs little enough that I think it's very worthwhile. Now I find posting photo's a piece of cake - hence I've put a few up There were people from all sides of the Armed Forces there, as well as Police, Fire and Ambulance personnel. It was a really moving day. I thought this was a stunning piece of work for a jacket and just had to get a decent photo of it. It's a really visual reminder of the Falklands conflict.

And a few more photos - this time from the "Ride To The Wall" event, at the National Memorial Arboretum, back at the start of October - truly one of the most moving experiences of my life. Over 8,000 people, on 6,000 bikes, all joined together in remembrance of those who have lost their lives in the Armed Forces and Emergency Services (Police, Fire, Ambulance etc) since the end of WW2, and in support of their families, friends and comrades. I joined with a couple of mates at Leicester Forest Services on the M1 for one of the 11 group ride-in's.

And a couple when I'd given her a good clean up to show at the Rugby Bike Fest. I LOVE this bike !!

That's mine sorted for this year

Well, the fat lady sang, but she didn't make the grade. Carb kit came. New o-ring on main jet and spang into life on 2nd kick. It's been an ordeal.....for me....pushed and tested me. But at my age I've got used to how it can be. I am very grateful for the support here and rex's for the coils rewind. Life certainly throws 'em at a person. I'm drained, haha. Thanks everyone.

It just means you chat the most and on a regular basis

Thanks, Iv give the carbs another full clean today, found a bit of wear on one of the slides and the slides seem to be sticking so not sure if that’s linked. I’ll pop them back on and see if it makes any difference.

i go out after 7:30pm to avoid traffic, or before 9:30am on weekend mornings. taking it easy preserves your licence and allows you to enjoy the scenery my last ride i decided to treat the bike to some salt air. stopped at Barton on sea to enjoy the view across the Solent to the isle if Wight. the car parks had cleared out a lot by the time i got there. its always nice to avoid other people when your a miserable old git like me

if you pay peanuts...

Well they let me book the Friday off so will run up then.

No booze last night so a wee 105 mile jaunt on my 1975 Trident. Stopped in Largs for a photo and tea Edit, eventually sorted

Nice picture bud. Unfortunately I was hungover today so the only bike action was 3hrs cleaning one

I've been on earlies last two days so roads dead on the way in (0400hrs) and chok a blok on the way home. Some crazy filtering yesterday by a load of bikes and scooters, which I let myself get caught up in. When I finally got through it all I was fkn angry with myself as there were some stupid risks taken No harm done tho (other than pissing off a load of car drivers) and a much better run into work today

Same up here , mobbed ,,first warm day,,,

Totally concur jcr, but as there was three of us going out to National Trust today I had no choice but to take the car. Seen so many bikers on the roads (motorways included) was very envious. But, and a very BIG BUT. the weather was so hot I don't think I would have coped too well in my full leathers being in my seventies. Mike.

For those into engine porn. My 1975 T160 Trident was burning a bit of oil, so having missed out on a few weekend aways due to lockdown, I saved my money and gave the bike through to Grin Triumph in Kennoway, Fife. He is a one man operation with a great rep for auld Triumphs. I dropped it off in March and picked it up a couple of days ago. He stripped the top end and rebored the barrels out to +20 and fitted new pistons. He also fitted new valves, guides, springs etc and vapour blasted all components. Apologies it's not a Yam, but hey...the sharp eyed will note that the vacuum covers on the carb gantry are actually Yam parts, so qualifies

Out today, 15 degreees ,,,hottest yet,, i was on the 550.. mates on Yds7

Hi Lorraine welcome in. Is this any good? https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjszLiA6cvwAhVxThUIHVc-CecQFjAAegQICRAD&url=https%3A%2F%2Ffichasmotor.com%2Fen%2Fyamaha%2Fyamaha-fzs-600-fazer-1999%2F&usg=AOvVaw0BPcomdB6NdPs0n_02DxER Link above will take you to the page below or just type in "FZS600 1999 spec sheet" and follow your nose to something that might help. Good luck. FichasMotor Brands Search YAMAHA FZS 600 FAZER 1999 YAMAHA YAMAHA FZS 600 FAZER 1999 DESCRIPTION The motorcycle Yamaha fzs 600 fazer of 1999 was manufactured by the company Yamaha and corresponds to the series of Yamaha fzs 1000 that encompasses motorcycles of different displacements. This bike enters into the category of naked and the first model of the Yamaha fzs 1000 generation began to be sold to the general public in the year 1997, that's why we are talking about a a motorcycle generation that already has 24 years. To give you a little more information about the characteristics of this bike, it has an engine displacement of 599.00 cc (36.55 ci) and a total power of 95.00 hp (69.3 kw) at 11500 rpm with an inline four-cylinder, 4-stroke engine with electric starter. When this model marketed to the general public, had an incredible starting price of 1.170,00 €. Take a look at the information of this awesome motorcycle. TECHNICAL SPECIFICATIONS YAMAHA FZS 600 FAZER 1999 GENERAL SPECIFICATIONS Make Yamaha Model fzs 600 fazer 1999 Year 1999 Category Naked ENGINE AND TRANSMISSION Displacement 599.00 cc (36.55 ci) Engine type Inline four-cylinder, 4-stroke engine Power 95.00 hp (69.3 kw) at 11500 rpm Torque 61.00 nm (6.2 kgf-m or 45.0 ft.lbs) at 9500 rpm Engine compression 12.0:1 Bore x stroke 62.0 x 49.6 mm (2.4 x 2.0 inches) Valves per cylinder 4 valves Cooling Liquid cooled Transmission 6 gears Final drive chain DIMENSIONS AND CAPACITIES Full weight 217.0 kg (478.4 lb.) Front weight ratio 49.0 Height to seat 790 mm (31.1 inches) CONSUMPTION AND EMISSIONS Average consumption 0.64 liters/100 km (156.3 km/l or 367.53 mpg) Greenhouse gases 14.8 CO2 g/km. (CO2 - carbon dioxide emissions) 14.8 CO2 g/km (CO2 - carbon dioxide emissions) SPEED AND ACCELERATION Maximum speed 133.0 mph (214.0 km/h) Acceleration 0 to 100 km/h 3.500 seconds Acceleration 60 to 140 km/h in top gear 11.800 seconds CHASSIS, SUSPENSION AND WHEELS Front wheel travel 120 mm (4.7 inches) Rear wheel travel 120 mm (4.7 inches) Front tire 110/70-zr17 Rear tire 160/60-zr17 Front brakes Dual disc Front brake diameter 298 mm (11.7 in.) Rear brakes Monodisc Rear brake diameter 245 mm (9.6 in.) OTHER SPECIFICATIONS Starter Electric starter QUESTIONS AND DOUBTS ABOUT YAMAHA FZS 600 FAZER 1999 When was the first model of this motorcycle manufactured? 🏍 What is the fuel consumption of this motorcycle? How much power does this motorcycle have? What is the maximum speed of this motorcycle? How long does it take to accelerate to 100kmh from standstill? SPECIFICATIONS OF SIMILAR VEHICLES Ktm 990 supermoto r 2012 Honda sl 125 1973 Bultaco tss 1966 Triumph Bonneville T100 2020 Bimota sb8k santamonica 2007 Kreidler street 125 2009 Legal Notice | Privacy Notice | Cookies SpanishItalianGermanFrenchJapaneseDutchPolishPortugueseRussianChinese Copyright © 2021 FichasMotor

Some know already but , well sometimes things feel like there is a higher order. On the vmax forum there was a fellow selling a set of carbon dymag wheels, i saw the advert September last year time but had neither the money or the need at the time. Fast forward, months of covid lock up, (i keep a little slush fund to pay for my biking which has just gone up through last year). Then the drive hub shat its self and the crap that followed. Well i stumbled back across the wheel add, no comments on the post, wheels had low miles, maybe a couple of thou. With tyres and such and with them being cheap, for dymags, i sent a message on the off chance. Well f me, he still had them, he was waiting for the lockdown to end to ebay them. Sold. Bugger me if i didn't sell the old wheels the same day for 300 quid, flogging some other bits that came with the wheels (short shocks and such). Made total cost to me for a pair of carbon dymags around £600. Bloody amazing to ride on, it really is something of an experience, the lack of rotating mass and the difference it makes to the bike. Took it for a proper 100 mile blat yesterday and it was only just as i was getting home that my head was starting to figure out how to ride with them. Pegs dragging the roundabouts heading back to the village, plenty of tyre left so frame bolts are next . Look killer too.

Was expecting Monty Python.

Doesent have valve seats, what it does, or rather did! was have crank seals, they are long dead. I would bet just about every seal on that motor is split or has shrunk to the point of failure. Would be a VERY smart move to fit new crank bearings at the same time as having sat that long they may well be toast so while your there for an extra tenner. Check the other significant bearings too. They can sometimes rust if they have been left without a covering of oil. Depends on where you are but as you haven't given us ANY real information to work with I'm guessing. You can get full seal and gaskets from fowlers. Bike has been in production as far as the engine goes for donkeys years, parts are readily available. Cycle parts not so much.

A new, instant covid test

78 Yamaha XS500 C OEM Chain Guard 1A8-22310-00-00 MY124 | eBay E-Bay and Google are your friends... P.S. You wrote: 1A8-22310-00-00 It should have been: 1A8-22310-00

I finally found a downloadable service manual that covers the 1995 with the KYB USD fork and figured out how to free the spring from the damper rod. Of course it requires a special tool that can easily be improvised with some plastic pipe and a washer but since the seals can easily be replaced without disturbing the spring, I decided to simply wash everything with Maxxis Suspension cleaner and call it good. Rather than using air space to measure oil, I used volume. I put in slightly more than 16 US ounces in an effort to stiffen the compression a bit. I also used 15W oil. I won't bore you with all the work, time and money I put into this project but it was a fight at every turn. Now the bike that had been "stored" for 29 years with 162 miles on the odometer, now has 168 miles on it. Tomorrow, much more! https://www.facebook.com/bicycle.repairman.75/

I say go for it. But if they turn out to be shit make sure you tell us so we don't fall for it too

Throwing a slight curve on this, double check the wiring, i know, i know but bear with me, the early monoshock bikes use a 7 wire cdi which uses 2 source coils. One for low speed, one for high. The later bikes had a cleverer cdi and use 1 coil. Its not uncommon for people to switch the ig parts about thinking everything swaps but it doesent work, well it does badly and if the red is broken or not connected but generally it wont rev out. Something for you to look at, have had a dt175 since i was 16, yep bought for 2 quid in the pub (yes at 16!), still in my garage under a blanket and im past 50 something the dt can barely do lol into the wind. When you do get it running properly you want to richen things up a touch, e5 and more so e10 run hotter than normal unleaded, (yamaha's are already happy with unleaded as japan never had leaded fuel). So you need to richen the mixture to prevent burning a hole in the piston when riding fast, (go on ask... still have the piston somewhere). Hope it helps.

Hi everyone I'm back, see I haven't missed much except bloody hell Jimmy that's a shocker, keep her bonnie shiny I'll be up in the summer to take her for a Italian service for you you lot couldn't organise a piss up in brewery Staffordshire show is on 23/24 April. I know drewpy is going as am I.anyone else we'll see you there

Welcome to the forum bud. Never been on a TDM, but have read and saw a few of Drewpys adventures on his. Sound great bikes

Well it just finished today,,,,the best and hardest rally in the world,,, across the deserts of Saudi this year For those of you that don't follow it, Sam Sunderland from the UK has won by just 3 mins from 12 days of racing. Great achievement. Pat

blackhat250 still is a great bike sounds great. Just got it going woohoo. Vacuum pipe from inlet manifold needed connecting to fuel petcock. Felt sorry for the guy who sold it to me coz it would only run for 10 seconds at a time.

Good evening" welcome aboard ,

went out with a mate to Southport carousel Took it really easy as too warm and the car drivers just CBA driving sensibly. Avoided a few situations if I'd been a bit faster. Lots of harvesters and tractors out too ATM

Woah, woah, woah, woah..! Chances are that if you had a cracked calliper, you'd know about it! It sounds to me like your bleed nipple is blocked. It's fairly normal for air/fluid to come out of the threads... 1/ Don't crack it open quite as far, it's only supposed to be cracked enough to let air out then nipped up again quick. 2/ Buy a new bleed nipple (I'm pretty sure they all have the same threads on them...). Out of curiosity, how are you bleeding the brakes? Are you: a/ Doing it the old fashioned way and using the lever? b/ Using a vacuum bleeder? c/ Using a pressure bleeder?