Yamaha Workshop

Thinking of getting one for my WR. Are they easy to fit?

Hey all I have got a dt 125 r 1996 when riding it will not go over 6k sometimes a little bit more just sounds like it is losing the spark every now and then but is fine all revs up to 6k it does it in neutral but allows me to get to 8k I have recently done crank seals and it run fine after that so checked all magneto an stator they all look fine I'm very stumped now can any one help There is a video on you tube showing what I mean. Ill post the link soon I have changed spark plug Cleaned the carb New coil and lead Checked all wires for wear If any one can help would be much appreciated

Turns out I do! Went to change the rear pads today, only to find both pistons seized in the rear caliper, and a lovely stress fracture running through the entire thing so I've had to bin it grrrr. Issue now is I can't find another one to replace it with, and I'm not buying from the states as I'm UK based and would pay through the odds thanks to our lovely Government. Anyone have any idea what caliper would fit a 98 XJ600S? Cheers

I have not been able to get a manual and need settings for the carb. Fuel lines were blocked so opened carb and cleaned it. There is a set screw inside which I cannot remember what setting it was on. Also airscrew..where is it and what`s its factory setting. Can anyone assist me?

Hiball My rev gauge seems to be fogging up since I changed a few of the bulbs does anyone know what the cause of this is Thanks

Hi guys Has anyone fitted a tomtom rider v5 to a xvs950? Im going to attempt it myself and was looking for any tips please. Cheers Tonybill

Hi Just got an xt 125 and want to slightly lower the front end. Looks to me that I can just draw the fork tubes up through the top yoke by about 30mm by loosening the pinch bolts. Any problems against doing this? Also there doesn't appear to be a petrol tap as such. I assume its a diaphragm arrangement. If so do they tend to let by as it smells slightly of petrol when sitting stationary. Thanks for any advice Cheers Dave

Good evening all I have bought my son a 2009 xt125x, a week later the speedo has stopped working after ringing my local yamaha dealer for a new one i was shocked to be quoted in excess of £300.00 for a new one, Is there any other speedo that would fit in its place, only paid £800.00 for the bike so was trying to source something cheaper. Thanks in advance for your help jim

Right sorry onto the next fault ive found the neutral light doesnt work.tried changing the bulb with no luck.there is a blue wire that comes from the switch to a connector block near thw rad.that is reading 0.10 volts regardless of whether ignition is on or off it is also reading same voltage at bulb holder does this mean its the switch thanks

Hi my 2003 dtr125 project I have now noticed yet another fault lol the rad radiator pipes and coolant in the rad and around the head is nice and warm and a blue colour but I noticed the expansion bottle under rear panel was empty after filling it and riding it for a couple of days the bottle doesnt get warm and the water I put in there isnt mixing with the antifreeze in the rad and head etc any thoughts on what the fault could be dont seem to bw losing any coolant now so dont no why it was empty and level hasnt changed doesnt seem to overheat but temp gauge sender is currently faulty and needs replacing as always reads hot even when bike is not running and ignition is sq…

Hello everyone! My name is Ryan Meyer and I am a Canadian who has moved to the Netherlands last year for school. Along with a couple major lifestyle changes, such as mountains at my backdoor being subtracted for the flattest country EVER, I as well do not speak Dutch. I am still learning the language basics, so this makes the process of finding parts (as well as daily life) pretty difficult over here, so I hope I can get a bit of help from you guys. My intentions are to create more of a brat style mixed with tracker and lots of cafe influence, so I hope this works for your visual aesthetic. I do however possess great taste , which means you can save your knickers from…

Hello, I own a 2007 Xt125x, I need to replace the starter clutch, does anyone know if the YBR 125 starter clutch will fit and are they year specific ? Also need to change the chain and sprockets, does any know what's best. Thinking of altering the front sprocket (number of teeth), has anybody tried this ? Cheers Andy.

no stranger to bikes but as far as 2 strokes go my knowledge is zero just brought a dt175mx basket case so i can escape this winter from mrs miffa and her silly soaps ....what may seen stupid questions to you all stars are deadly serious to me ... so heres the first few of many dumb questions to come there's no 2 stroke oil tank/container fitted ,don't even know where on the bike it should be and what the tank connects to, theres a blanked off inlet on the carb??? what draws the oil ???? surely some kind of pump?????so when you amazing people tell me how to locate the pump ,how do i test it?????? as me thinks if its been removed does the pump work?????? many…

Has anyone seen a piston like this, i recently take out a piston for changing piston rings and i saw this hole one the side to exhaust. Should i purchase new piston or just new piston rings? WHere do i measure piston or cylinder bore to find out what is my piston size? Should i bore cylinder for bigger piston? Thank you very much Greeting from Croatia http://imageshack.com/i/m914b9j http://imageshack.com/i/2hejzkj http://imageshack.com/i/ngk2j1j

Picked up my new mixture screw for the dtr today as the old one had broken off at the end which sits inside carb and they decided to crqmn it in went ro remove it tonight and cant getvit to budge and its starting to round off.is there anyway off getting to it from insidw the carb. Thanks

Drained the gearbox oil today out of my dtr125 after riding it home from work and the oil thsts come out was grey is this normal or should I be worried dont know the last time it was changed.thanks oh and bike runs and rides spot on other than the tick over issue but thats sorted just waiting for bits

Posted on here yesterday but has disappeared?? How hard is it to change ignition switch? help needed please Thanks

Basically when I brake and slow down my bike sounds like a clunking coming from the front part of the engine Ybr 125 2 years old Any ideas why this is happening or how to fix it Any help is welcome

get them while you can http://www.halfords.com/webapp/wcs/stores/servlet/categorydisplay_storeId_10001_catalogId_10151_categoryId_255215_langId_-1 with this code HCCM01 get another 10%

Hi, Just bought a DTR 125 , the brake light works when pressed however the back light does not work so cant ride it in the dark , sorry if this is a noob question but there is only one bulb in there im assuming because it has two thin wires and one of them may be faulty, any advice please going to halfords soon to source a bulb to see if this works