Naked

can only post in for sale/wanted section. AJmartin

Hi people i have an r-125 and want to get a bit more from the bike can anyone help ! I have a full scorpion race system on the bike but dont no were to go next ? All info would be greatfull Have bin told you can get an upgraded ecu but dont no were from ? Yamaha said there tec's have had 22bhp from the bike but wont say how they reached this !? Someone please HELP !

Hi guys, I decided that I will either custom paint my Yamaha FZR400 Genesis or either order full set of original stickers. I would rather custom paint it but I have no idea where should I ask about this. I live in Sunderland, Tyne & Wear, UK and looking for private person or a company that is specialised in custom painting or are able to create stickers for mu original body. For custom painting I was thinking about Green Flames or something original that no one have And for set of stickers something that will make my bike look good than just white with FZR stickers at the side. If you know such places please post their addresses here or contact numbers. …

Is it possible to add a different top yoke and coventional bars to a TC for more upright riding

Hi there ************** Can anyone tell me what usd forks will fit my 1990 yamaha fzr 1000 exup all so want to fit handlebars as well thanks craig

hey, i need settings for my FZR 400 3TJ 1989 mikuni carbs. i cant find any manuals or anything on this bike jap imported. but yeah its running to rich, the only way it would run/idle is with no air box also takes a while to start but im guessing that its flooded and gunked up the the spark plugs. so yeah could any one help please? cheers danny

Hi All Got a 1975 rd200 in shed. engine and frame 397300580 it has a twin leading shoe but a coffin tank and seat. i guess this is wrong and it should have round tank ,can anyone confirm this and if round tank is correct does anyone know if its possible to get a set or seatpan for this model, i know were there is a tank. Please help yambo.

I'm trying to find where I can get hold of rearsets, engine covers, race fairings, etc for a 1992 FZR1000. Any help appreciated.

I have recently bought a Dt125 R 2001 2 stroke, which I am having trouble with. When I bought the bike it was in a pretty poor condition but the engine seemed to run ok. I have been running the bike daily and it had really poor acceleration and bottoms out at 55 mph I have checked the air filter, changed the oil, clutch plate and cable and also fitted the correct spark plug (as some fool was using the wrong one). Also changed the oil settings, as it was really drinking oil and checked the boost valve settings. The bike seems to run better and is quicker, but I still don't think its as quick as it should be and still bottoming out at less than 60mph A friend of mine see…

Hi All i own an 51, (reg in 1/1/2002 though) red r6 its completly standard other than adjustable levers. ive only owned it for 8 months but i do mainly use it for work and now i just want a bandit or something of that sort, as stupid as its sounds its too good to be used just for that plus a bandit would be cheaper for parts etc..., it is a stunning bike and near perfect condition with only 13,000 miles, has full history up to 10,000 and had 3 owners. so i just wondered what sort of price could i expect to sell it for as i cant seem to find may red ones for sale. if you can give me any advice i thank you in advance.

well im looking for a newer shape fairing for the rear of my xj as the old one looks well, dated, does anyone know of any fairings that would fit straigt off or not require to much modification, im thinking new fz or sv or just generally anything that wont look so old, any help will be appreciated

Hi all, I love in Spain and am currently doing my bike test here - passed the track test yesterday first time and now only have the road test to go before I can upgrade form a 125. Problem is over here they have introduced the A2 license which only allows a 35 kilowatt bike and it must have a power to wight ratio of 0,2 kW/kilo. So therefore I think the minimum weight must be 175kilos and it can´t be more than 47 BHP. I have seen the MT03 which I love the look of , but there don´t seem to be any other streetbikes that aren´t chopper style that I could look at. Does anyone have any idea of which bikes would come into that range and also and more importantly if …

Greetings, The question below pertains to my 1982 XS400 Maxim. The bike was running fine the last time it was used so I'm thinking there's something stuck in the fuel system. Was curious if someone could provide some suggestions after pondering the following symptoms: Bike sat for ~3 months without being fired Got the bike to warm up but, oddly, the motor will idle very high (3-4k) when the choke is 'off' and the idle will come back down to something more normal when the choke is engaged. Basically the opposite behavior from what you'd expect. I don't believe there's kinking or snagging in the throttle cable as throttle operation seems pretty snappy still. Is …

Hi fellow associates. My name is Vykintas and this is my first post here. I own a 91 Yamaha TZR 125. And all I can say is, my bike is just great! Ok, getting to the point here.. The bike is ok, acceleration, top speed is good, no strange sounds coming out of it, everything seems to be fine, BUT. If I leave it for a two weeks or more and then come back to my garage, try to start it up, it doesnt start. I checked the battery, the spark plug, fuel. Tried the choke too. My garage isn't cold, everything seems to be fine. I need to push it, run along with it, jump to the 1st gear few times to start it up. After five minutes of warming it up it starts just fine. I'm thi…

hello, i am doing this for a rider called charlie.this is for any one who would be intrested in sponsering a yamaha R1 rider that has raced for 2yrs with derby pheonix. charlie came 1st in the novice championship and 2nd overall in 2008 and in 2009 came 3rd. over the past 2yrs charlie has made himself a name with the club from braking club lap records to giving marshals cakes. if you are intrested please get in touch and i will give you more infomation. thankyou

I have a 1980 Yamaha XS1100 with a yellow sticker on the side of the block that says BUILT TESTED APPROVED by T G Greencastle Sweden. I cant find any information that traces thsi back to a stock manufacturing sticker, does any one have any information on T G or even what the initials stand for? Any information is greatly appreciated.

Hi everyone. I just recently picked up an 82 XS400SJ Heritage Special. It needs a lot of bits and pieces but one of the things I am concerned with is the master cylinder. There seems to be too much travel in the handle to start with as it almost touches the grip and the resevoir sits at an almost 45 degree angle when the bike is level. I have a suspicion that this may not be the correct master cylinder for the bike. Does anyone know the correct part number, can give me any idea how to positively identify it or, better yet, can someone post or send me a picture of just what this master cylinder should look like and how it is oriented on the handlebar? Does anyone know i…

I would like to know the year & model for an old RD 352.105481. I think its between 1972 & 1974.

Greetings from the "High Desert!" (Lancaster, CA.) This weekend I may trade my 93 F-150 truck for a 96 Yamaha 600 Seca II. Would any of you give me advice regarding the pros and cons of this bike? Need to know what kind of compression to check for in each cylinder too. Thanks!

Deleted due to lack of interest.