Naked

I have just bought my son a TZR 125. It is registered as a 2001 TZR 125R on the papers but the local shop tells me that it is actually a 1995 TZR 125!!!! How can I tell for sure? The engine No. is 4JB 00752 and the VIN (frame) No. is 4JB 007609. Can anyone help please?

hi iv been look for an air filter for my yzf r125 and k&n don't have one for the bike is there anyone who has managed to fit a filter to the bike and what type is it and model i was thinking of getting one for say a yz and see how it work cheers rob

Does anyone know where i can get a cheap rear right hand fairing?

I have been trying to find a rear spray deflector for an MT-01. They used to be in the accessories brochure a few years back. Cheers Kev

I hava a Yamaha YQ50 Aerox R 2009 and i have changed the exhaust to a technigas but the old std exhaust has 2 metal pipes at the front end, one thats welded up and one that goes to a black box which could be a sensor of some sort, which then goes else where? The new exhaust does not have these pipes on, so i have tucked the rubber pipe away, with a bolt in the end to stop any dirt getting in etc. Anyway the bike now performs worse than before, so i took out the bolt possibly a slight improvment but still runs bad, Wont go up hills very well, not that it did before. I have not done anything else to the bike like removing the front washer or changing the rollers, filter or…

Hi I wonder if anyone can help. I have just bought an 03 R6 without doing my homework and now realised I should have 3 keys. Unfortunately I have only one black one. Is it possible to clone these keys as there is a guy on e-bay who claims that he can supply a red and a black key for £ 120 or a cloned black key for £ 50. He does need either the key reader (moric) or a black key. This is a bit worrying as he is in Poland. I am assuming if he can 'clone' the keys there should be someone in the uk. Does anyone know if this is possible???

Service Manual for Against forum rules, please use for sale section OG

I have a 1982 Maxim 550. When I first got it, we were able to get it to start by spraying starting fluid in the sparkplug cylinder. Now it only turns over but, won't fire. The battery and all spark plugs are new. Any ideas? Valves? Coil?

are them abs plastic fairings any good?? are they recommended??

looking for info about Exhaust for stratoliner

Hi Quick question, has anyone else tried to lower an R6? I have a 2007 and bought some new dog legs to fit, having a couple of issues though TIA Rich

Hi all just wanted some feedback, should I customize my bike? ,it's a xj600 on a h plate, its not in bad nick and only done 13k its going to need overhauling soon and as it'll be in bits for a bit was wondering if I should just go for it, but i haven’t got a clue where to start any tips or advice much appreciated.

How do I remove the covers to get to removing the rear pegs without making a mess?? Cheers Daz

hi i have a tzr 50 05 and it wont start ive got a spark got new spark plug but it doesnt seem like it wants to combust but it does try startin but wont idle im realy stuck now if any one could hep cheers

I have seen a couple of FZ6's with the fairing removed, and a Speed Triple type double headlight setup installed. Does anyone know if this can be purchased as a kit, or do you have to cobble it together from parts? Any help would be appreciated.

hi, this is my first time here, i have a problem starting my aerox 50. brought it home today, stopped bike and everything seemed fine, went to start it and it wouldn't start. I have a good spark at the plug, petrol going to carb enging cranks over fine there seems to be plenty of compression but would not fire up. any help out there!!?? many thanks

Hey everybody, just joined. I've got a 92 Seca II that I'm having some problems with. I bought it in May of this year with 7600 miles on it and I rode it about 4000 miles with no problems. Then, one night the lights got dim and it started to die at low RPM's. I kept it revved up and made it home and found the battery dead. I took it to Advance and got it tested, thinking it had dropped a cell or shorted, but it checked good. They charged it for me, checked it again and it was good. With no load, the battery had 12.9 volts and with the bike off, but the ignition on (headlights and ignition energized) it showed 12.6 volts. When I started it, it dropped to about 12.4…

I want to get a nice pair of saddle bags for my 07 v-star 1100. Do I need to get the metal frames to go between the bags and the bike to keep the bags from getting into the rear wheels?

Hi there, Just to say what a good site this is and a great source of information. Just passed my bike test a month ago and now am the proud owner of a yamaha xj600 1995 model. My question is i need to replace the footpegs for the pillion pegs and the main footpegs for the rider. The rubbers are falling apart and are looking a bit tacky. What i wanted to know is where can i get a set of foot pegs for, I would rather some after market ones but i dont know where to look and what would fit. If anybody would be able to advise i would be greatly appricated. thanks.. pinhead123.....

i got a maxim 550 from my auntie but we can't seem to figure out what year it is the vin is 5k6020285 can anyone help me out?