Yamaha Workshop

Hello, I have recently fallen for a 1972 Yamaha 200 Electric for which I have little or no information on. This is my first bike. My question is "Is there a different model number I should be looking under to find a manual"? I cannot find one for a 1972 200 Electric. Perhaps it is in the VIN # Any help greatly appreciated.

Hi This is a problem that has the local Yammy dealer beat! I have asked for assistance from Yamaha Australia and they merely refered me back to the same dealer. I live in Darwin. The next nearest decent Yamaha workshop is in Adelaide, 2500kms away. A 1998 Diversion 900. No history of any problems. 70,000km on the clock put on by an older rider that used the bike in a stress free manner with most distances run out in the country. It started using a bit of oil so the dealer recommended new rings. The rings were put in and all seemed in order after reassembly. Starts and idles beautifully. No noticeable probs when the bike is used around town with gear changes at 3…

hi can anyone help with some info please ive got a 96 foxeye and my forkseals a knackered, i cant get the use of air tools so im struggling to get the bottom bolt out to remove the damper rod, does anyone know where i can get hold of the tool to lock the rod or even some info on the tool itself to see if its possible to make something similar . Oh and while im picking your brains anyone know if any other rear shocks fit the foxeye think mines is looking a little worse for wear atm possibly too many pies according to the Mrs

Somewhere in cyberspace there's a how-to on fixing ignitor boxes. I'm talking about cutting one apart, replacing what's needed & using epoxy to put it back together. The machine that needs the job is a US model, 1983 XJ900R. Anyone have a URL or link? Jake in NH.

Somewhere on the net there's a how-to on cutting an ignitor box apart, replacing the needed parts & expoxying it back together. Anyone have a URL or link? Google search has been fruitless.

SR125 intermittent (Electric) starting problems. Sometimes it starts fine, then the next minute it wont start and wont even bump. Which means I cant go very far, cos I am scared of it conking out on me. Given contacts etc.... and good clean and spray. Any ideas, cos its driving me mental and I need the bike to practise ready for my test, which is real soon.

Hey guys, was wanting any info on the best way to de-restrict my 91 TZR250R. I've been told it can be done through the cdi but i don't know where to get a replacement one. Would appreciate any info on the 3xv tzr(manuals, service tips) anything that will get me goin faster but not cost me the earth. Cheers

Hi Folks, I cant get the seat off my sr125, and cant see anything in the haynes manual. I know it sounds silly....but can anyone help me. Thanks.

Bike Stripping Down Frame And Arm Shot Blasted And Powder Coated New Chain Buffer 2003 Engine With Servo Needs Tidying To Make It Look New Yolk Completed With Fresh Grease And New Bearings, Excuse The Grease On The Top Yolk The plan is to build it up bit by bit to make it look new, I need many new parts as it is a 1989 DTR but with a 2003 engine When completed i want a full dep system and send the head off to Stan Steves for it to be ported ect. This weekend the plan is to get new chain and sprocket, Tyre and rear disc. Get the rear wheel built up. IF ANYBODY HAS ANY USEFUL PHOTOS…

i have an xs 850 triple it pops, bangs, and lacks power above 5 1/2 thousand revs .timing is ok carbs are balanced. any ideas(help greatly received)

How's it going? I'm new to the club and just have a question for anyone out there with a 06 R1 (04-06). I just got a new 06 and with 250miles and a trackday so far. My question is What the hell was yamaha thinking not putting on a heat sheld. My ass is so Hot. I wish I had done some more reading up on the bike before the purchase If I knew this first I may have gone another way. I owned before this a new 03 R1 and on the day I hit 17,000 miles on it I laid it down. Insurance did what insurance does and took the bike. Anyways back to the new bike so far I'm happy with the bike with the handling but not so much with the throtlle response or the lack of power in the …

can someone help me? my frame on my r6 04 seems to be getting very hot, i have only just noticed this is it ok. it has just had a full service it has done 2550 miles. thanks

well i have been told that my sprockets and chain are knackered on my little old thundercat so its time i changed them i have got to remove my swing arm to get the chain off as its an endless chain.I have never done anything like this before but do have the haynes destruction manual at hand so if anyone has any help or tips on this matter to make my life a little easier that would be great....cheers I have 2 weeks to get it sorted and im confused already Why oh why do shops have to charged sooooo much

Does anyone know why my sr125 backfires through the exhaust when coming off full throttle and slowing down? It doesn't happen all the time but is rather annoying when it does. I have tried cleaning the carb but this did not help. The bike also stalls sometimes when it's hot and stood at traffic lights and junctions.

I have a 2001 Yamaha Warrior 350 four wheeler, yesterday I rode it and today it won't run right. The bike will idle fine but when you crack the throttle it pops, cracks, and then stalls. What could it be? I sprayed it off yesterday after I rode could I have gotten water in some of the electric stuff or what. I cleaned my air filter, put in a new spark plug, drained, and refilled the gas tank with fresh gas. I don't know what else it could be. Anybody got any clues? Thanks, Sean

So out of nowhere my bike is running really crummy, it cuts out at low RPM and is really hard to restart .... the only cause I can think of would be that it fell over in the driveway a week ago (a case of the kickstand not being all the way out on a downhill slant-- stupid I know) The bike was running when it fell over but showed no signs of being messed up at all unitl now. Any ideas??? I'm thinking maybe something happened in the carb or something.

Hi, My step dad has a hole in his exhaust and need a new one, he's spent ages bowsing the web looking for one. So if any one knows where he can get an exhaust to fit it please leve a link Thanks Phil

Hi all, just signed up 2day!. I'm the proud owner of an '05 xt660xsm I bought from new.Since I first rode it I noticed at low speeds the throttle response is quite snatchy,I'm thinking it's because of the fuel injection. Anybody out there got any ides how to reduce this snatch? GOOD RIDING !!!!!!!!!

Currently got a fzr600r foxeye. Need more bottom end power, so was thinking about changing my rear wheel sprocket any idea on a suitable one??? i'm thinking ill need to lengthen my chain. any one done this or have any advice??

I am new to bike maintenance so does anyone know how to change the tickover on a XJR400 also does anyone know where I can buy a manual