The Bar

What a fantastic documentary, could have done without the 3D aspect to be honest, I just found it distracting, but the content of the film could not have been better! If you get the oppertunity......go see it!

Well i have been whizzing about on a scooter while waiting to find a decent bike.. The bike is nearly finished but i am changing the clutch rollers on the scoot as the old ones were knackered.. My question is when i took the old ones out they were covered in grease.. Are they supposed to be greasey or should they be bone dry??.. i will add the grease looked pretty manky so it may not have been put there deliberately.. Any ideas fellas?

if you see it let me know.reg BCX 80R or if you know how to track down lost bikes,cheers

can anyone tell me if a standard exhaust for a fz6 s2 08 model would fit fz6 s2 09 model,thanks

I am trying to find out if a Radian (86) top triple tree or the upper & lower as a unit will bolt up to an 86 SRX. If so will it retain same spacing for my front wheel? As you can probably figure out I want to install a standard handle bar and I don't want to drill holes in my stock triple tree to mount risers. Radian triple trees are available on ebay right now at reasonable prices. Unless someone on here has a Radian top triple they want to sell. Thanks,

Mike's restoration project at Looking for chainguard for RD 400f Daytona Special

Went to the cinema last night and saw the new 3-D film about the Isle of Man TT races... I'm not a fan of Sports bikes and racing, but this is definitely something WELL worth seeing!! For those that don't know, the TT (Tourist Trophy) races take place on the Isle of Man every year. The big thrill is that this isn't a racing track - These guys are racing on normal public roads, through what are normally 30mph limit areas and around mountain roads at up to 200mph!! There are several races of different classes held over a week or two and these guys are blasting past brick and stone walls, lamp posts, sheer drops and all sorts. Accidents can and do happen - In it's hu…

Hi All, with the amount of oils available now and having been away from bikes for many years, what would be a good oil for the autolube on the LC? Obviously the smell of the Castrol is a great hit still, but I have read that there are many others now as good. Also is it still better to go for the pre mix than the auto lube? All recommendations welcome, Thanks, Mick.

Went to the Yorky strokers day by the sea " Phoned C.B.D. when passing Rippon [ 7.30.am] met him at Fridaythorpe [ seaways caffe] Where we had breakfast, and met two-strokers from all corners, Rode to Scrarborough, to the Classic Bike Article .

Alan the moped 'ALAN' - one of only 30 million ever made - It is widely believed (by me) that this unassuming little moped was the original training bike of the 'Ghost Rider' (please see photo 1 for documented proof) Looking resplendant in non-original Llama urine yollow and household apple white gloss this little fella has covered a mear 3463 miles from new, which cannot be verified of course. I inherited this vehicle from my late father in law who, to the best of my knowledge, never actually had it on the road. It was stolen by some oiks then 'recovered' for ten english pounds. Substantial damage was caused to the lighting/ignition 'module' (handle bar switch) …

My '79 XS1100 special will start and warm up fine. rode it to a gas station to air up tires and now it wont start. I can hear the start button relay switching but then nothing else happens. It happened once before and i let it sit for 24hrs and it started right up. HELP!!!

does anyone know if an rd350 will fit in a yr2 frame?? is there much diffrence in how they mount up??

Hi all, Im new as you most likly worked out I am going to be buying myself a new or nearly new Yamaha YZF 125R most likly in blue or black Id think you know what they look like but here she is anyway above I do love the styling of this bike and I feel is an ideal first bike ? Whats your thoughts people ? Many thanks and chat soon bill

hey new to this site, only got my bike a few months ago, but i wanna buy a power pipe and can't find any anywhere.

hi on my yamaha dt125r i have recently blown my head gasket and have replaced it but there seems to be a lot of pressure in the header tank and keeps on blowing the cap off also all the water in the radiator goes and when i block the pipe going into the header tank it squirts water all through the joints and i have no experience with engines i think its something to do with the thermostat but unshure where its located can anyone help me out??

Hi all, I'm thinking of investing into a gold iridium (spectra) visor for my black shoei helmet. Most websites state that it is not road legal but how strict is this law? Could I get away with it on sunny days? Temptation is huge!!

does anyone know how to bleed my water cooling system on a yamaha dt125r

Does anyone know of a good web site or something that tells you where all the green lanes are??

What does a trumpet player do if he finds a weed in his garden... ...rootittoot!

Hey folks, The divvy has got an M357t on it but not wired in, no fob, but I do have all the original documents and even fitting centre details, which is in London. Does anyone know of an authorized dealer or fitter / repairer in Scotland, preferably in the Edinburgh area? I've had a google about and can't find any definitive info. Thanks.