drewpy

crank seals will have hardened a bit, but as its fine when warm, I would think that's fine. Could be a bit of crap in the carb pilot system for low running. was the bike stored with the carb and tank dry? was there a fuel filter fitted?

its 4 stroking lower down, if you've pushed the power further up the rev range, that's where you need to stay. You can't have more power and expect it to perform all throughout the rev range, its a compromise. have you tuned your power band into when the rollers bite?

Don't know the thunder cat per se, but there could be up to 3 spacers. 1 twixt left sprocket carrier and swing arm 1 fits inside the left bearing between sprocket carrier and left hub bearing, looks like a top hat and most peeps throw these away when renewing the bearing as it is drifted into it. 1 in-between the hub bearings maybe 1 right side which usually is the calliper mount

see Allen Millyard's youtube channel and say casings can't be welded. I've had a motor mount welded up and its no problem for 10 years its been on there. You need too make sure all oil is out but some castings can be porous and there may be an issue

I think you need to get it on a dyno just to check fuelling and see the power curve. will save a lotto time in the long run Run it in first though as dyne's are brutal

Two wives decided on a girlie night out. On the way home they needed a pee and nipped into a graveyard. Then they realised that they didn't have any wipes to finish up, so the first one used her knickers, and the second one found a wreath and used that. The next day one husband rang the other and said 'No more girlie nights out, mine came home with no knickers on'. The other said, 'Well if you think that's bad mine came home with a card in her crack that said 'From all of us at the fire station - we'll never forget you.''

my mate has the tracer GT

usually a captive nut, even if it did fall in, just use a magnetic aerial thing to fish it out

I'd love to meet up again. going to be a strange year though I think.

very simply, a diode is a bit like an electrical valve, it lets electricity flow one way and blocks it going the other way. stops damaging feedback to other electrical systems

Just found Tommy's ride and slide photo

Howdy

i know it was, hence the emoticon it was shrek

Dr and the medics

it was me, I did leave a note but it didn't process.

I think I adapted my throttle tube on the FZ to make it more quick action. I'll have a think on what I did or where I got the info from found it, i grooved the pvc to keep the cable from jumping off (it never did but I felt it needed it) https://www.kawiforums.com/threads/quick-turn-throttle-mod-with-pvc.122605/

looking at this fiche, its a bearing https://www.fowlersparts.co.uk/parts/4012594/yp250-5sj2-2002-060-a/rear-arm-suspension should be able to buy from a bearing supplier if you can get the number off the bearing it self. heat up the alloy first and press out straight. oil seal will pop out using a small pry bar 93306-302YK

Merry Christmas everybody. Family still Covid free (a few on front line police force too) Stay healthy 1f14a9be-1691-4cd8-9b03-ff3e87a1c5b2.MP4

needs a caganer

you take my breath away, a good group. what do you play?

usually carbs and their ickle drillings try some easy start down the carbs to see if she fires up, then you have your culprit

Ruby Tuesday?

mike, you can't connect to a WhatsApp image. you would need to download it or take a screen print first