Yamaha Workshop

have read in number of places about aces having 6 speed boxes, where can i get these, is it box out r1 or wot

can anybody help? Firstly Hi im new so how you all doing. i need to buy a c spanner to adjust my rear spring back to factory settings but dont know what size c spanner i need?.

hello i recently bought a dt230(lanza) (4tp) which i will totally rebuild but i need some help.. does anyone have something like a service manual.. wiring diagram.. or parts catalog? any help would be greatly appreciated..

Hi all! I went down on the highway a while back and have a lot of cosmetic damage. One of the big issues is my fuel tank is damaged. I bought a new one and have taken off the old one. My question is, how do I take out the big white pump thing from the old tank so I can get it into the new one? There seems to be a little tab that's preventing me from pulling it out. Any help is appreciated.

Hi there, I have a bike I know nothing about. It is a Yamaha RS200 in blue. I have never rode before. I am going to attempt the CBT after new year. I always thought that L plate learners could ride under a 125cc. My bike, being a 195cc, is out of bounds for me until I pass my bike test. However, it appears on this list as being 33bhp. http://www.bat-motorcycles.co.uk/33bhp.asp Does this mean I could ride with L-plates? Sarah

HI! I AM LOOKING FOR INFORMATION ON UPGRADING MY YAMAHA TDM 850 (3VD). I HAVE BEEN TOLD THAT IT IS A GOOD IDEA TO FIT A 17” FRONT WHEEL FROM A THUNDERCAT, BUT WHICH SPACERS, SPEEDO DRIVE AND DISCS DO I USE? I HAVE ALSO BEEN TOLD THAT THE FRONT BRAKES CAN BE IMPROVED BY FITTING THE BLUE SPOT CALLIPERS FROM THE R1 OR R6, ARE THESE A STRAIGHT FIT? I WOULD BE INTARESTID TO HEAR OF ANY OTHER MODS I CAN MAKE USING PARTS FROM OTHER MODELS.

I have a new 1100. At about 200 miles it began to backfire thru the carbs. It is very cold natured. It backfires if you push it from a start, expecially up a grade from a stop. (Not that much of a grade). I now have 840 miles on the bike, at 730 miles I had the 600 mile service. The dealership has not been any help, explanning that 1100reds are cold natured. I also feel that the low end power should be better, however I have never owned a bike of this size. Anyone out there have suggestions. I will probably go back to the dealer after the Holidays.

Just purchased my XJ650 tried to ride it bur found when the engine gets warm I cannot slow the engine tick over down. I would apreciate any help.

i have the problem with my "lights" fuse keeps blowing when ever i put a fuse in, the light switch can be off but as soon as i turn the key on it blows the fuse, i have tried wiring bits up on by one but this came to no avail, any ideas on what the problem is? cheers

Just purchased my XJ650 tried to ride it but found when the engine gets warm I cannot slow the engine tick over down. I would appreciate any help.

I am trying to obtain a new oil cooler, the hoses and fittings for an '83 XJ550. For some reason these are not shown or listed in the spares catalogue. Can anyone help ? Thanks Steve

The indicators and hazards on my 2001 TDM 850 have stopped working, They were fine until last friday when half way home the indicators started to work sporadically but now nothing at all. Thought maybe a relay but apparently the hazards and indicators are on seperate relays so (apparetnly) the chance of both going at the same time is rare. Any advice would ne of great help, fitted a set of heated grips 2 weeks ago. don't know if that would make a difference, they do not go through the wiring ciruit thay are straight connection to battery.

Hi all, can someone here tell me what size headlight bulb the 2007/2008 YZF R1 is.

Merry Christmas everyone!!! I think I know the answer to the first question but I will ask anyway 1. Can you fit an electric start to a yz400f? 2. What is hot start and how does it work? (I have got a manual coming in the post from flea bay but I want to know) 3. Does anyone know a web site I can get a detailed description of the bike and what mods are have been made to improve the bike??

Can anyone tell me which way the arrow goes on top of the piston when installing it.The engine was apart when I got it. This on a 1975 GT80B.

Hi, guys I have just bought an yz400f and I need to know where I can pick up a permanent supply to charge the battery from? Also does any one know how different the 1998 version is to the 1999? Thanks for your time

Hi Guys & Gals Is there any way of removing the akrapovic heat proof sticker of the exhausts, so i can replace them with new ones "they are looking a bit tatty" any information would be much appreciated p.s may all have a very merry x-mas and a good new year

I'm trying to find out how much it would cost to replace a fairing on a 1996 fzr genesis 600cc. I think the bike is a us import and at the moment it has no fairing. If anybody could point me in a direction to find the three fairing panels i would appreciate it, as i know very little about bikes and am trying to help out a mate

Hi guys and gals, Need help.My thundercat as and RPM issue.And goes up to 8000 when on neutral then goes back down to zero and goes back up and again this during the entire time im riding.Seems like a bad conection or something can anyone tell me where is the RPM sensor or cable on the bike so i can find it and test it out.Ive looked but cant find where it plugs in the motor. Thanks for infos Dan