Yamaha Workshop

Hi there. I went to start up my ybr today and i noticed that the engine light flashed 3 times slowly then 8 times faster then repeated this fashion. I was wondering if there are any error code lists for a ybr125 08 or any other bike with same ecu? Thanks in advance.

Hi there, I bought an old (1982) XJ750 a few months back, which I have been fixing up. She has got nearly 80000km on the clock. Currently I have problems with the way she is running: She starts ok, idles a little unevenly, but rides away ok. As she warms up, literally after 2 or 3km, she develops a "flat spot" at lowish revs (2000 to 2500 rpm). This gets worse and worse as she warms up, till (after 8 or 9km) I have very little power at anything under 3000 to 35000rpm, making slow riding almost impossible. She feels really flat as I try and accelerate, and then a surge of power as the revs gets over 3000rpm. She sounds fine at higher revs. And if I stall her I can…

Hi everyone my first post here I recently bought a Yamaha DT 175 1992 and have been rebuilding it. this is how it was when i bought it: And this is how it looks today Anyway next thing i am going to do is reinstall the engine and i was wondering if you guys know about any electric drawings of this bike. and also of the oil pump. Hope you can read my english

hi there i am looking for a new/used front wheel for my dt 125 on a 02 plate and was wondering what other year dt front wheel will fit as it very hard to find one for a 02 plate. many thank for the help if any one can help

Recently bought an RXS100 project. The lights only work when the engine is running. Is this normal or am I missing something?

have a problem with my back break light, light works but not when i use the front break, any idears what this could be????

Hi, Can anyone tell me can i fit a 4 into1 xj900f exhaust onto a xj900s. thanks jasonc

are the 2004 to 2008 r1 clocks the same as the 2006 2008 r6 clocks that look the same? also can you fir the r1 clocks to a 2003 bike?

Hi does anyone know where I can purchase the valve stem oil seals for a 1995 YZF750R. Also is it easy to replace them or do I need to get a garage to fit them. Any info would be appreciated. Thanks in advance.

please has any one out there got a wiring diagram for an xj 600 1991 model .

Hello there, first time poster. I'm looking at purchasing an xs250 as a project, it has a blown motor. The bike in question is an '86 XS250 RK, engine number 17E-105551. I've managed to find a replacement engine that looks to be in decent condition, althought it looks the same, the owner is not certain of the year or model of XS250 it came from. The Engine number on it is 19Y-000901. I was hoping someone here would be able to help me determine if it would fit from those engine numbers? If not, does anyone know of the development history of the xs? Was there a point where they changed the frame or engine? Thanks in advance.

I posted last week about the problem with the exhuast clamp bolts rounding off. Well i successfully got them out. However, I cant get a new bolt into the holes. I have tried re-tapping a thread, but it is too tight a space, and i have tried several bolts but there appears to be no thread so i am really struggling. Anyone any suggestions? I have pics available aswell

i have recently bought a yzf750r started no prob rode it back 75 miles following morning non starter have had the carbs checked cleaned and balanced bike then started three hours later restarted bike no probs left running for two mins turned of then started again following morning no prob later that afeternoon wouldnt start turned over no prob with a putting sound through exhaust petrol getting through no probs there can you help please want my bike back on road

Hello. Does anyone know the stock size for an 84 xs400 maxim main jet size. Ive been trying to dial it in since I bought the bike. It has K&N pod filters. The bike had 2 different main jets when I first pulled it apart.I've had 125,122.5,120 and since I don't have 117.5 ill be putting in 115's tomorrow. Also I can find lots of parts and info on 83 maxims but hardly anything on 84's. Why is that???And before it is suggested I will not be reconnecting the stock air box. Thanks

hi all, i have just joined and was wanting some info if possible please??? i have a yzf very shiny 750r! ohhh how i love my bike,, cough cough,, what i was wanting to know is can i take my clocks off and replace them with a set of digital clocks?? if anyone can help i would be greatfull thanks...

AFTER 5 MONTHS WORK THE XJ600 (1982) HAS JUST PASSED ITS MOT...HURRAH!!! HOWEVER THE SPEEDO HAS STOPPED WORKING, WE HAVE A NEW CABLE FITTED SO I GUESS ITS EITHER THE CLOCK ITSELF OR THE RACE IT SCREWS INTO ON THE FRONT WHEEL?? ANYWAY I CAN TEST EITHER TO FIND OUT WOT THE PROBLEM IS.....?? I DID READ SOMEWHERE ABOUT ATTATCHING A DRILL TO THE BOTTOM AND SPINNING IT TO SEE IF THE CLOCK IS WORKING, THIS SOUND OK TO YOU GUYS OR WHAT? CHEERS KEITH

1995 YZF750R Hi all, I need some help. I am endlessly looking on ebay and other friggin sites looking to change my standard end can on my bike to a better one (akrapovic,yoshi...etc) What size do I need as a few ppl ask the hole size and whats the better can? --------------------------- SORRY FOR DOUBLE POST

does anyone know where i can download a carb balancing diagram for a diversion xj900s,thanx

the headlight on my 1983 XVZ12T will not come on. We checked the voltage there was 4.5 volts at first, then we started to trace the wiring back and it jumped up to 12 - 13 volts. I have checked the voltage at the switch and there is 13 volts. the bulb is good, but the light still will not work. could it not be getting the correct amperage? We are stumped!!

hi everyone just bought some indicators for my dt125x & need some help wiring them up!!(some pics) if possible..i have the indicators but i think i need indyclips..here's the pics..thanx alza