Jump to content

Naked

MT-10SP, MT-10, MT-09SP, MT-09, MT-07, MT-03, FZ1S, FZ1N, TDM900, XT660, XJ6S, XJN6N, FZ6S, FZ6N, Scorpio

  1. Started by mkjd05,

    Hello Everyone, I am a new rider with a YZF 600R. Recently my bike started allowing me to take off with the kickstand down. For obvious reasons I want to fix this. I've tried to find similar posts and have found very little. Sounds like some switch has gone bad. Any Advice?

      • Like
    • 4 replies
    • 1.2k views
  2. Started by Wildgaz,

    Does anybody no where I can get the Yamaha Tank Decals from for my virago xv750 (1983) the ones ive come across the screw hole are to far apart (106mm) mine are 102mm centre to centre any help would be appreciated thank Gary

    • 2 replies
    • 1.2k views
  3. Started by blueeyedman57,

    Looking to lower my 2006 FJR any ideas or help?

    • 1 reply
    • 1.2k views
  4. Started by d-peach-13,

    Hi guys, Just a quick question if anybody could help me. I was wondering how i would go about resetting my ecu on my bike. Any help would be appreciated. Thanks people

    • 5 replies
    • 5.9k views
  5. Started by d-peach-13,

    I was wondering if anybody can help with a code that is coming up on my bike. It is one long flash and 9 quick flashes. My bike wont start and it just turns over

    • 1 reply
    • 1.3k views
  6. Started by d-peach-13,

    Hey i was wondering if anybody could help. I recently had an attempted robbery on my bike and i have wired the barrel again which had the wires ripped out. I used different wires to extend how much wire was coming off the barrel and wired it all back up again. It started first time and i was really happy. The next day i tried starting again and it was just turning over and the engine management light was flashing with one long flash and 8 or 9 fast flashes after that. Can anyone help in what i have to do??

    • 4 replies
    • 9.9k views
  7. Started by 06dempc,

    Hi all, I've had to apply for a new V5c for my RXS100 due to losing the original in the move. I believe I have found the VIN 31J-011569 however, this dosent seem to be liked by VIN checkers. Advice?

      • Like
    • 10 replies
    • 14.3k views
  8. Started by lespaul1959,

    Hi I'm looking for some fashion of wind protection for my XJ6N. While at low speeds it's fun, when belting down the M40 (at legal speeds )it's not so much fun. Either that or I'll have to trade it for a Fazer FZ8

      • Like
    • 9 replies
    • 7.5k views
  9. Hi guys. So I'm running into an interesting situation. I have resurrected my uncle's old bike that was sitting for a while. It is now idling fine and will start in about 2 tries. However when I try to ride the bike won't rev past 6k no matter how much throttle i give it even though it can rev up to 14k. It's having trouble going above 50 mph. Does anyone know what could be going on?

  10. Started by nicholas.badger,

    Has anyone else experienced the handle bars shaking on their xj600s diversion? It happened when i took my hand off the handlebars to stretch my back as my backpack was quite heavy. I was going around 30 mph.

    • 9 replies
    • 2.1k views
  11. Started by Heisen1895,

    Hi all, Got a chance to buy a 2006 FZ1 N:- http://www.ebay.co.uk/itm/281631805127?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT Now the bike has a ton of nice extras, and looks beautiful, mileage is ok and the guy is putting 12 months MOT on it and a new rear tyre. Problem is, upon reflection, he has obviously been racing with it (the mods make it fairly obvious), also he says the first stamp is in the service book and the rest of the services he has done himself (which i guess is possible, i know some guys that do it so why not) 2 previous owners, and he has owned the bike himself for about 3 years. Now, do i take the gamble and get …

    • 2 replies
    • 1.1k views
  12. Hi again guys.Having a problem starting the bike.New battery,new plugs but it doesn't fire up.I know its obvious thing after all bike was standing for 2 years,but where should i start?fuel pipes,carbs?Thanks

      • Like
    • 42 replies
    • 12.3k views
  13. Will they fit? I have just got my hands on a modified Yamaha FZX 750, and the brakes are already good, but... The blue spot callipers are just awesome, and they look brilliant as well. ;-)

    • 3 replies
    • 1.7k views
  14. Started by Rupert123,

    Hi all, I have purchased a yamaha r6 from the year 2004. The engine has a pretty low mileage of 8900. The bike has not been used for the last few years with the last owner. Now a couple of days ago Ive been having some problems with my gearshifting. from neutral to 1st is oke and no problem. Then from 1st into the second gear it shoots into neutral. If i try this over and over again eventually it will change gear, Then from 2nd gear until six there is no problem at all. Does anyone know what the cause may be? I've read that the 99-02 models had some problems with the 2nd gear but this should be solved in my model. I can't find any simual topics with this pro…

    • 12 replies
    • 11.6k views
  15. Started by Matrixtomb,

    Hi the owners handbook shows that the handle bars can be adjusted into a forward and back position. Can anyone please tell me if I can do it and how or do I have to go to a dealers. Thanks

    • 1 reply
    • 1.4k views
  16. Started by Nootenboom,

    I have a XJR1200 1995 with new exhaust pipes and origonal silencers direct no more muffler collector box at the end of the silencer pipes there is a riveted disc with a small opening in the center is about just under 1 inch, the question is how big should I make it to get a bigger sound like on a Harley? any suggestions At the moment the rear section is riveted with 3 rivets so I could drill them out to remove the section to make a larger opening. my e mail is [email protected]

    • 3 replies
    • 1.2k views
  17. Started by leefzr6,

    Hi all hoping for a little help/advice .I have an fzr600 1990 (see gallery) the fuel tap on these bikes are prone to snapping.was wondering if there are any direct replacements of the usual metal type.those of you in the know will be aware the fzr has a long plastic one. Thanks for any forth coming help.

    • 6 replies
    • 1.5k views
  18. Started by norrisg24,

    Hi, I'm due to pick up my tracer sometime after Sunday - when it stops raining. Notice that yamaha have just added the accessories list to the website. Bit disappointed that the back rack cannot take a top box for touring. I'm sure aftermarket suppliers will make one but wonder if this will be able to be used with the ABS yamaha side luggage? Or if it will need a carving of plastic job to get the top box rack on which will then not fit with the side racks. I suppose Givi will also make side racks but the yamaha ones look smart. The yamaha rack will be be let doen with only a soft luggage option. Anyone have any thoughts?? cheers

    • 0 replies
    • 1.2k views
  19. Hello I am just asking what would you suggest the best way to ride in a rebuilt engine

  20. Started by 89radian,

    Bought a 1989 radian a couple months ago and plan on doing some stuff to it this winter. rather than make multiple threads with separate questions I figured I would make one with a couple questions for you all. 1. I would like to go mono shock, what stock bikes with monoshocks have swing arms that would bolt into my frame with minor mods or no mods? 2. If I have to use the stock arm can I swap to a disk brake? 3. Do pod filters require syncing or rejetting? 4. What streetbike tanks have a center tunnel that I could use? Feel free to answer what you can and give me insight thanks!

    • 4 replies
    • 1.5k views