Naked
MT-10SP, MT-10, MT-09SP, MT-09, MT-07, MT-03, FZ1S, FZ1N, TDM900, XT660, XJ6S, XJN6N, FZ6S, FZ6N, Scorpio
2,284 topics in this forum
-
What would happen if my mate cut's the pipe going into the trottle body and puts volcity stack on it.
-
- 8 replies
- 6k views
-
-
Hi, I have recently aquired a 2000 xj600s diversion which does not have any illumination to the dash area for the speedo and tacho. All other bulbs are working ie, headlight, indicators etc. What type of bulb do i need, how many, and are they easy to replace. Is it likely its a bulb or a fuse which may be the cause? Many Thanks Marc
-
- 0 replies
- 2k views
-
-
Hi All Could somebody please tell me the difference (if any) between the XVS1300A and the XVS1300 classic models? Regard Ray
-
- 4 replies
- 1.4k views
-
-
i'm looking to buy some items for my YBR to improve the performance/looks. Is there anything out there that i can buy? i've heard people getting 75mph out of there YBR but i manage 65 at a push
-
- 6 replies
- 17.7k views
-
-
Hi, Just got the XJ6 2009 and loving it, I bought a tail tidy and am stumped at how to remove the current tail! I can see the 4 bolts under the seat that needs removing which is fine, however I'm confused about the wiring and the indicators and how to take them off the oem one and adding them onto the new one!? Is anyone able to assist please! If not I'm going to have to take it to the local mechanic and he'll charge £60! Is there any instructions or tutorial anywhere? Thanks for looking and any help?
-
- 11 replies
- 7.2k views
-
-
Hi, ive noticed the headlight is a little...dim. Could anyone tell me what the brightest bulb this bike can have?
-
- 0 replies
- 1.2k views
-
-
Hi my engine management before the bike is turned over flashes 4 slow times and 2 fast times. Then when the bike is turned over and running it stops on permanent. The bike stills runs fine with with no problems. i was just wondering if anyone could help me with what the problem is. Thanks. PS the day before this light came on my speedo stopped working could that have anything to do with it as ive been told by other people that it hasnt
-
- 1 reply
- 7.6k views
-
-
hello. i am after a exhaust cover for my bike because this women in a car hit me from behind and wrecked mine. If any1 knows where i could get 1 for cheap could you let me no plz. thanks
-
- 1 reply
- 1.8k views
-
-
I think I can get a Thundercat with 45,000 miles on it (sounds like a lot!) for around £900.00. It seems to be a good specimen but sounds a bit tappety, is this normal? There are thundercats with 25k on them for between £1500-£2000.00 but I know my way around a bike and the tappets wouldn't be an issue for me to do myself, just wondering if on these bikes in particular with that mileage that there may be a deeper issue! Thanks Pie
-
- 6 replies
- 1.7k views
-
-
Hi I,ve got a 2002 fazer 1000, it there away from adjusting the clutch to stop it dragging slightly, when I'm sat in traffic or just pull up I need to blip the gas a couple of times to get the clutch to completely disengage?? Is this a common fault. It done 29000 miles.....Any help would be cool... Thanks
-
- 1 reply
- 2.8k views
-
-
Hi there, new to the forum and looking for some advice. I recently bought a 2002 cat and although bike is prisine for its age the rear shock spring is corroded and its bugginf me. Wa looking to strip it out, clean and repaint it but I've found a company that will supply a new spring relatively cheaply. Only problem is they need the specification for the spring to supply a like for like replacement and they don't have them. They are looking for the Internal diameter of the spring and the load rating in Lbs/sq In. I can give then the I/D measurement but have no idea where to find or how to work out the load detail. Can anyone point me in the right direction. …
-
- 1 reply
- 1.2k views
-
-
Morning All, First time poster, and rider, so bear with me please . Passed my CBT on Sunday, and got a second-hand YBR to commute to work on, however I have a couple of issues and looking for help/advice please; 1.) Speedometer and odometer are both not working, can you advise how to check if the cable is damaged or loose? 2.) Electric ignition does not fire at all. The electrics all come on fine, green neutral light on etc, but when I depress the electric ignition the neutral light dims slightly and there is no starting sound at all. Even after a ride out for an hour or so, there is no power. 3.) Where's the best/legal place to mount my tax disc? I…
-
- 0 replies
- 1.1k views
-
-
Hi, everyone, Picked up my 2009 YBR 250 from local dealers and noticed on way home a distinct but not very loud metallic vibration at between 3.5 and 5k revs., accompanied by an irregular knocking. It's not there when I take the bike through this rev range when it's not in gear. I can't go any higher up the rev range as the bike has only done 75 miles so needs running in. I suspect something's not right with the transmission. It still has dealer warranty so I'm not too worried. Anyone out there got any ideas? Do I need to take it back to the dealers?
-
- 2 replies
- 1.3k views
-
-
hi wounder if any 1 out there can help,just bought a fz750 1987 2mg model,does any1 now if there is a full front end of anyother yamaha that will fit cheers garry
-
- 1 reply
- 1.7k views
-
-
Hey guys, I'm wondering if it's possible to purchase a square light and fairing for a YBR125 '11, like this image (creds: Wikipedia) And obviously, if it's possible to fit it to one that came with the circular light. Thanks!
-
- 2 replies
- 3.4k views
-
-
Hi everyone, I've already started this thread once but it seems to have disappeared into the ether! I've just bought a 2009 YBR 250. Does anyone else out there have one and can anyone answer me the following: 1. Is it restrticted in any way and, if so, can it be derestricted? 2. Is it an 'export' model or are they sold through the usual dealerships? 3. I found a photo on the net of a 2011 YRB that was clalled a 'Fazer'. Is it part of the Fazer family? 4. What is the spares situation? 5. Any weaknesses in the model? Can anyone cast any light on what seems to me the dog's as far as a 250 is concerned. Can't believe a bike like this isn't flying out of the sh…
-
- 2 replies
- 1.7k views
-
-
hi , i have a yamaha dt50 2008 but it is fully original, i want to know what parts i can put on the bike. For example what kind of rims? are there any other options than the original ones? what kind of exhausts are there , is it possible to put a double exhaust on it? if you have nice ideas please tell them to me my budget is maximum €1000 thnx , grtz lorenzo
-
- 6 replies
- 2.7k views
-
-
My SZR 660 has no fairing. It has had it removed plus the bars are now MotoX style renthals and the headlamp is seemingly off a Suzuki ( Its huge ) Now, the radiator is now exposed as is the radiator fan etc, and I was wondering if there is some bottom half of a fairing that I can use for this bit. I am very happy with the way the light and the screen is now, I just need that lower part. Some pics of my bike are here www.fatrakoon.co.uk/szr660/index.htm Thanks in advance for any tips you might have for me.
-
- 0 replies
- 1.6k views
-
-
Just got my first Dragstar 1100 Classic, year 2008. The guy from whom I bought it, who had it from new, said to only use 98 octane, but in the manual it says to use 95 octane unleaded. Anyone got any views on this? Also, whats the best polish to shine and protect all that chrome?
-
- 5 replies
- 2.4k views
-
-
I'm trying to find a new old stock replacement fuel tank for my 93 Black/Grey YZF750R? Can anyone recommend a dealer/parts supplier in the UK who may stock one? Thanks Duncan
-
- 1 reply
- 1.8k views
-