The Bar

Clever bit of coding - it's all perfectly safe for work, until you select all of the text and colour is automatically applied to each letter. http://fichtre.net/yop.html

Paddy and his missus on the bed She's got crotchless nickers on, She says to Paddy "lick this ya big- sexy bastard"!, he says "feck- off"! "look what its done to your nickers"!

Have a good one mate

This is how sad I am I have just bought some Yamaha flip flops...........................TWO PAIRS!!!

Hi all I finally got round to finishing of my FZR600 genesis, I bought it last year for £660.00 of evil bay, full service history with 31k on , required new fork seals and new bearings for sprocket carrier and rear wheel as they were shot,did a oil change, filters,coolant ,oh and a new rear tyre the rest of the bike was ok ,apart from it had been coated in wd40 which is fine for protection but when it been left on for a year or 2 everywhere was sticky and a sod to clean off, so after a couple of washes with stardrops great for cleaning has it contain no salt unlike your fairy liquid then a good polish ,all in all i have spent around another £150.00 so for under £800.00…

nervous as hell sitting my first part of my test tomorrow so i may just have 2/3 beers then bed early. oh how i hope to hell i pass (module one)

Hi to all I was wondering if someone could HELP. I would like to move an fzr600 from Dereham Norfolk to down Hayle in Cornwall !! Since i don't have a car a licence, van hire is out of the question & i don't balls to ask my lovely Girlfriend...dew to the fact it's more Bike/bike stuf. So if any one can help or have some advice it would be Groovy.

hello folks i have just joined the site and was wondering if any of you good chaps could help ??? ok my stepson recently bought a very very good thundercat on a P plate...he was coming home 2 days ago and he said that he had no clutch and the lever was very loose and no pressure, when i got home i took the clutch cable casing off as i suspected his cable was snapped however it is fine not snapped and still attatched to return spring...thats as far as we got and are now stumped as to problem and would appreciate any help or advise.. many thanks Jim

Hi There, Can anyone tell me what pressure i should put into the top of my FZ400R fork struts???? They haven't seen an airline for years, so it's looking quite flat!! Best Wishes Brian

Hello, I am inheriting a 1978 DT 175 Enduro that needs a new crankcase cover. I will be getting my riding certificate soon and will be using the bike to get back and forth from work. However I want to get the cover before I take my rider's test. I've searched online but can't really find anyone that sells these. Can anyone give me some hints, suggestions, etc? Thank you, -Hutch

Hi folks first time poster,Can anyone help,i renewed brakepads on rear the other day,had to take off caliper as pistons were seized up,after lots of spray oil and a large clawlike grabber i managed to get the pistons back. i replaced the caliper and now the pedal wont firm up when bleeding the system, am i missing something here???

Hi Everyone Whilst out on my bike Friday evening I pulled in at a local bar for a Shandy as you do there were lots of people sat outside enjoying the sun whilst I was walking thorough the people some one I know not as a Friend said why have you come down here on that little thing well I saw red straight away I think this chap owns a Fireblade we did get into a heated debate about the virtues of owning a small bike its a shame people have to be like this I love my bike its great fun and that's the main thing in my book.

Turn signals light but do not flash. Horn does not work but high beam light dims when horn button is pushed. Headlight is fine when battery is fully charged but will turn dim at idle after running bike for about 30 min. (Battery not charging?) Will brighten when bike rpm is reved up. Any ideas? Thank you.

hello all, anyone of you having kuryakin scythe mirrors on their bike? Can you share your experience? Also, where to buy/order? i'm a bit reluctant to mail order in the states, bad experience before. (i'm in belgium) thanks Peter

all the best mate have a good one.

My 1999 FZR 600 makes a whistling noise from the front (fairing) from 25 to 55 mph .Any ideas ? Please

hi folks this weather is great. the question is this what helmet should i buy for my first one ie make,spec,price.what should i go for/stay away from ie make. cheers for help. ps my mate gave me a souomy helmet till i pass my das(module one this sunday) cheers again friedegg

New to list .Would like to know the modern equivalent paint match for a 1973 Blue YB 100 .If possible maybe in a aerosol. Thankyou

hi have put scorpion exhaust on yzf r125 and have lost about 8mph off top end and it is cutting out on starting help

Hey guys. I have a small problem with my helmet's visor. My wee brother in law decided it'd be a good idea to play with my helmet and place it visor down into our lawn that's covered in rocks and stones. Needless to say, the visor is now scratched beyond all hope of repair. I've tried polishing and using the special wax stuff. No joy Now has come the time where I'm scouring the internet for a replacement visor, only to find nothing at all in the way of them. Do you guys know if the GMAC Jaguar is exactly the same as another helmet with a different name, or if there are any replacement visors out there? I don't really want to spend money on a new helmet…