Naked

Hi guys and girls I'm new to the forum currently got a CBF1000 but seriously thinking about a fazer thou '08 faired model, so come on persuade me to buy one!!!! I've already got brownie points off the boss she thinks the pillion seat looks v comfortable so thats a def plus. I'm a bit of a dwarf at 5'6" but the seat height looks low enough for me, getting a sit on one this saturday. It would have to have the hideous exhaust changed and a tail tidy fitted otherwise it looks the dogs bits to me, also got a test ride on the new CB1000R booked but seat height of 828 m/m may be too high for my little legs Which alarm do you people recommend got a Datatool 4 on my CBF and i…

Hi there, I just wondered if anyone had any advice about buying a cheap TZR125? I've got the option of buying a cheap 1992 TZR125 from a friend of a friend of a friend etc... I've just got my CBT and want to get my full license (got a DAS course booked early August) so I want to get a run-around to get some practice in. Unfortunately if I buy it, it'll be on the promise that the bike is OK as I can't get to where it's being stored to test drive etc. It's got 4 months left on MOT. I've been told "it smokes a little but all 2 strokes do". Has anyone got any experience of an old TZR125 and if there are any pitfalls/problems I should ask about? Much appreciated

hello, i'm new so not sure if this is the right section for what i want to know. i've just got my self a 2000 R6 but i didnt like the rear light so i'm doing the conversion from the 2002 model. i've got the rear light and under tray and now i've found out that i need the battery tray as well so i was just wondering is there anything else i need? also what kind of clips/botls do i need to secure the under tray? thanks Ro

Hey gang! I need some opinions before I buy a FZ 600. It's a '88 with only 8,000 km on it. It was stored for since '91 and sold to the 2nd owner in '06 and is now selling it. I'm new to biking and this would be my first bike. The seller thinks it may need a steering bearings, the carbs were just rebuilt. Asthetically beutiful, and has minor scrpaes form the first owner dropping it. How is this on the highway? How's the reliability? Is this good for a 1st bike? Will I out grow it fast and should go newer, better? Any opinion would be great.

Hi All, Could anyone let me know where I can find replacement fairings for my 1998 YZF 600r Thundercat? only I cant seem to trace any down on the net. Cheers.

Hi guys, Just bought a brand spanking new black yamaha fazer FZ6 S2 and not really got a lot of love for the standard indicators. I would really like a set of clear indicators...what do you guys recommend? Any help would be much appreciated. Thanks Dan

New to this forum so first of all a big hello!!! Just looking for some advice really. Passed my test a few weeks ago and am now enjoying myself on my new R6. I know that its probably not the best choice for a first bike but to be honest I dont intend to drive it like a man possessed so think I will be ok!! My question is about carrying a passenger. Is it comfortable for both rider and passenger? Not looking to do long journeys - maybe about half an hour at a time. A friend of mine is pestering me for a go on the back of it (he is about 14 stone) so Im hoping it wont cause too many problems. Understand that I will have to take it nice and slow with a passenger which …

hi yammy lovers. i've had my 08 r6 since march and i've only just started riding it today, (just passed this morning) i would just like to know, because i've been learning on some crappy bikes n etc, i've noticed that obviously the super sports bike are a different riding position, i'm still trying to adjust, bt thats not the matter here, the problem is, my hands and wrists feel sore, as if, i've been playing thumb war or something, is this normal for a newbie?? also i was thinking, could it be the new gloves i have which is the dainese full metal racers? sounds like a pathetic question i've asked but would like to say another hello to everyone here again since my last po…

Can someone please help me? I put a new starter in my virago and it won't start. The starter is brand new and I can here it turn but it won't start? Any suggestions?

Had my GSXR 600 K7 stolen 2 months ago. Just got money through and wanted something people wont want to pinch but look good and ride good! Got it in black. Now i bought it cash due to insurance pay out. Does anyone know if you still get the £350 cheque from yamaha or was that just for the finance deal? http://www.yamaha-motor.co.uk/products/inf...ouble_yammy.jsp (Yam summer deal). Cheers. Rob.

Hi, I am in the market for my first bike and have decided on a new FZ6 Fazer. Question I have is whether I should stump up the extra few hundred for the ABS option? Does the ABS really make much difference? I know from car driving I never (if ever) use the ABS, is this any different for a bike? Many thanks Warren

ok finaly ive done my reserch on exhaust for ybr125cc thsi wat i found http://translate.google.co.uk/translate?hl...2Bybr%26hl%3Den i got it translated for all ov u i hope this helps:)

Looking at adapting this exhaust to fit my 2001 r6,could this affect the running of the bike ? Or would it just be the case of fitting and getting it dyno'd. Any info on this would be greatly appreciated.

hi thinking about geting a cbr 125 wonderd if someone how had one coud tell me what thay thourt about it thanks

Hi Guys, if anyone has one of these standard shocks for sale please email me! Simon.

HIYA ALL JUST THOUGHT ID COME SAY HI NEW TO ALL THIS JUST BROUGHT A 1999 R6 MY FIRST ROAD BIKE LOL WELL MY FIRST LEGAL ROAD BIKE THOUGHT IT WAS TIME TO GROW UP AND DO ME TEST WELL ILL BE QUIT NOW AND STOP TALKING SH** LOL OH BUT LOOKING FOR ANY ONE ROUND SOUTH LONDON THATS UP FOR A RIDE ONE WEAKEND (THAT SOUNDS A BIT WORNG LOL)

Has anyone done this mod? I heard you can use the 3TJ wheel but does it drop straight in?

Hey lads, noob here, and yep you've guessed it, my first post is a question. Treated myself to a brand new FZ1 Fazer in March, and i fecking love my new bike, but it's just not quite an aggrresive enough riding position for me. I want to put wider & straighter bars on, and just wondered if anyone else has done the same yet, and if they could recomend a good set? Looking to go to something like 750-800mm wide, and no bend. Most set's i've looked at also have a rise in them which is no good, as it'll raise the height of the bars too much, and look crap in my opinion. What about other mods? I've got my moto gp style micron can coming next week, tail tidy,…

i use castrol bike polish .......any other gd tips?????

Any learners out there want to take a trip to luss???? We could get up to fifty (mph) and head into the sunset on an adventure! We can even stop at the milkbar.... p.s must have own L plates pp.s no superbikes please lol