The Bar

I just finshed this 1979 Yamaha HL500 replica an thought you people would like it for the archives. Here is a link to more description and more photos. 1979 Yamaha HL500 replica Rob Huskyrestoration.com

Hi everyone, Sorry for the slow loading times over the last hours, the site was trying to be hacked, someone was trying to insert malicious files on to the network. Nothing was affected, but we take great concern when we see anything inappropriate happening through the network and needed to ensure the site hadn't be exploited in any way. Our systems were scanning for any files possibly affected which slowed the site down considerably, no files were compromised. Moving forward we are continuing to make improvements to our systems to enhance security, and minimise any disruptions to the YamahaClub. Thanks again for your patience. Alex

http://www.kongregate.com/games/ArmorGames/obey-the-game have fun foams

Hi there. My names Kev and I'm from Wiltshire and ride a 2007 MT-01 with Akropovic's

Can any later model 600 cc owner(5 terminal regulator)tell me which wire goes where. A PO has butchered the connector off and fitted the wrong regulator!! Thanks

I love this Doctor! Q: Doctor, I've heard that cardiovascular exercise can prolong life. Is this true? A: Your heart only good for so many beats, and that it.s true? ..don't waste on exercise. Everything wear out eventually. Speeding up heart not make you live longer; it like saying you extend life of car by driving faster. Want to live longer? Take nap. Q: Should I cut down on meat and eat more fruits and vegetables? A: You must grasp logistical efficiency. What does cow eat? Hay and corn. And what are these? Vegetables. So steak is nothing more than efficient mechanism of delivering vegetables to your system. Need grain? Eat chicken. Beef…

Dear All New member here. I have a '81 DT175MX that I've owned from new but has been sitting under a pile of wood in my Dad's garage for the past 14 years. In the next year or so (once I get my garage sorted out) I intend to restore it to its former glory so will be on here looking for hints and tips. Current bike is an XR400R I bought last year after not having a bike for years. Last bike (in the mid 90s) was an immaculate RD350LC. Still curse the day I sold it.... Regards, Fulmar

Hi, I own an XJR1300 and go by the name of Denis. Been around for 56 years and on bikes for 50 of them. Fat, non-smoker(now) ugly but like a good laugh and the odd sherry. Just done a bit in the Gallery forum about my bike, so wont bore you here. Live in London (hate the place) but from Kent originally Married no mortgage(rent) and no kids Work as a Security guard Haven't owned many bikes, tended to keep them for a long time. Love travelling on the bike and fishing and darts. Laters........

I loved my XJR1300sp 5 happy years of grunting around with a big smile on my face, I sold it to keep a promise. The promise was a TZR 50 for my son. In May this year the small end bearing failed, the damage was severe but normal. One new barrel, head, piston, rings etc. When we called Doug Dearden Yamaha (Southampton) for prices of spare parts, we were told " we'll give you a price if we can do the work". We were on a tight budget so, bollocks to them! Now my little 6'4" son has a car, so, time to polish the TZR for sale. We need a coolant bottle lid and a pair of bar-ends, so off he trots to ParkRoad Powerbikes (Southampton), he's told that coolant lids come in a pack …

Hello, 4 months ago, i bought a 1989 FJ1200, in excelent conditions, recently it starts to give me starting problems, i have to boost it so it will start, i took the battery and they did full check up and test and they said it is in excelent conditions. i took off the starter, the brushs and the bushing are in very good condition. Anyone had the same problem or knows what the problem could be? thanks

hi all im after advise, does anyone know if a 31a-22210-01 shocker will fit as a direct replacement on a p plate xj900s im new to bikes awaiting my test got a diversion 900 but need to sort a few things on it before it sees the road any help appreciated cheers sid

HI problem is that when I am riding my Yamaha DT 125R, It over heats. When I take a look in the radiator, there is nothing in there because it as overflowed out of the radiator expansion pack on the back of the bike, i have also had the head and barrel skimmed twice as im sure it was warped and thought that was the problem but it still seems to overheat and spit water out Please can you tell me why this is happening and how to fix it.

i have recently bought a 1982 yamaha xt125(without the rev counter) and i would like to put it back to original so i am looking for the idiots light s as the one that are fitted ar leds and when i change to main beam they shine directly into my eyes,

a have my tzr r in bits again it seems to be running itself in to ground tried dtr barrel on it just burst the rings on it anyone can help .............................................. Edited by OG, use the for sale section

Hey there guys. Just wondering if anyone could help me? I have a 1985 Fz400 that i have recently got back on the road. I have noticed that the front forks seem to be quite soft. They have the TCS (travel control system) on the top of the forks which is like a air valve which i prossume you fill with air to get the correct amount of travel. After pressing the centre of the valve no air came out which either means they are leaking or just empty. Does anyone know what PSI these should have in them? Any advice or feedback much appreciated. Phil. Safe Biking.

Hi everyone Im new here. I have a cbt and am looking for a 125 motorbike to practice on. I am interested in getting a dt but the problem is that I am not sure if I am tall enough for it since I am 5'7. Can anyone shed some light about this and if I would tall enough for one.

Coming home from work tonight when suddenly progress came to a standstill at Mottram for a while, evantually get moving and 600 yards up the road theres a bike on its side and the rider lying on a driveway (people were attending). Hope he's ok and all you commuters take care especially now the journeys are in darkness.

Why is it, no matter where I look, the downpipes and x valve on my Genisis are impossible to locate? Surely someone out there knows where I can find replacement downpipes and valve.........yes I know that Yamaha will do it for silly money..... however finding the parts through a breaker seems to be my only option and yet so far no joy. Anyone that can point me at the right breakers will make my day.....week ....Year! FZR 1000 XUP Genisis 3LG 89-90 So please, if you know of a breakers that can help me please call EDITED OUT PLEASE USE PM in future any wants need to be posted in the wanted section as this is against forum rules thanks guys The Hortic

Hay is there anyone out there who can give me a wiring sequin for a 41R-71 flasher unit 9 pin for a 1984 FJ1100 or I think the 600 has the same if you have the ferrying of just tip it up side down and write down the colors for me I could do the same for you on somthing else you might need.

Hi! im just new here. i have a group here in the Philippines, Yamaha Riders. We're glad to be a member of T.O.C.