The Bar

Hello all, Can someone tell me how to remove the retaining bolt that holds the pillion seat to the rear fender? Cheers

A little birdie tell me the YOC gets a mention in 'Bike' magazine...can anyone here give us a report on it

hi there can someone help me i have a yz80 and i have just rebilt it an there is a hose that comes from the air box or reed valve and i dont no where it goes can so some help and see if u hold yor finger over the hose the bike will start and when u take your finger off it cts ot does anyone know wat its for ?? gary

Bagain get there quick Steve http://www.ebay.co.uk/itm/L-REG-1994-CLASSIC-YAMAHA-DT-50-WHITE-FULL-MOT-REDUCED-QUICK-SALE-/320819273618?pt=UK_Motorcycles&hash=item4ab2519f92

hi i've got a Yamaha DT50R 50cc moppet. its made in the year of 1992. i want to replace my engine block with the engine block of a Yamaha DT50R from the year of 2006. can i jsut yake out that 50cc block and place on my frame without any ajustments made on my 1992 frame. please help me, i'm really desperate. thanks

i have a new exhaust in my garage pre fix 3bw is this a dt125 or 200

Anyone ever been doing something, and needed to nip somewhere fast or do something fast and the tools available for them wasn't there? I was thinking earlier about toothpaste, and its use as a chrome polish. Has anyone else got any uses for random everyday stuff, that comes in real handy in the workshop or on the move? Anything at all, substitutes for bike care items would be great. 1. Toothpaste - Chrome/Metal Polish 2. Tampon/Screw Driver - Gets at oil in hard to reach places 3. Vinegar/Soda Crystals/Lemon Juice - Eats off rust, ready to paint! 4. Aluminium Foil/Coke - Removes rust/marks and polishes chrome. 5. WW2 issue P-38 Can Opener or Dough - Dont…

Hi everyone, Sorry that the site has been down without any explanation. It's completely my fault, I thought the upgrade I was performing was going to be a typical 15min job. As it was late at night in the UK, I didn't think anyone would be on the site so just started the upgrade without setting the board offline. Which explains why the board is down. Unfortunately it wasn't a quick upgrade like normal, and ended up taking about 12 hours work! Anyway I am also in the process of installing some new anti spam software to work alongside the existing IPB spam software which should help eradicate the unwanted spam users we've been getting over the last few days. Tha…

Hey folks!! As the regulars know, I've a huge soft spot for FZRs & have had a couple! Well, my daily trawl through the local classifieds has unearthed a cheap 3HE in decent shape, needs a little cosmetic tlc but apparently starts & runs well. I can feel a purchase & project coming on! Just gotta convince the wife it's a good idea....

Just thaught i'd share !! and Kev,,,, this is taken from the same phone

Hi, not been on here in a long time, but this has come to my attention today, and given its importance i'd like as many off you to sign it as possible. If you think the new test rules been brought in in 2013 are unfair then please please please sign this pertition. http://epetitions.direct.gov.uk/petitions/27455 Thankyou

does any of you 2 stroke genious's out there know the original size of the sprockets front and rear on a dt125lc2.....any help wouldbe appreciated THANKS chippy

hi all,i have a sachs roadster 125 and wondered if anyone (paul white)had any idea if the forks off any other bike would fit this model or what make the forks are.info on these bikes is not easy to find. thanks craig

Seen this on flee bay and thought was good idea for long runs or tours if you have no center stand. Anyone used one ? any good and can you get them in Uk http://www.ebay.co.uk/itm/Portable-Motorcycle-Jack-Stand-Easy-Chain-Maintenance-/260936456274?_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3

Hi Guys, My '89 DT125R has been standing for about 4 years before I got it. I have cleaned the carb fully and also cleaned the air filter. There is a bolt which wont come out on my DEP exhaust end so cant check whether the exhaust is coked up. Is it worth getting some de-coke solution to try and clean her out a bit, atm she doesn't run very well past 7k rpm and im thinking maybe she all gummed up insdie (oo-err). If they are worth trying can someone recommend a good de-coking solution to try? Is this stuff any good? :http://www.ecotek.eu/PowerBoost.htm Cheers in advance

(3) PHOTOS OF THE BIKE http://www.use.com/t...0&saveid=509246 http://www.use.com/t...0&saveid=509244 http://www.use.com/t...0&saveid=509251 (1) PHOTOS OF THE SERIAL NUMBER OR VIN NUMBER STAMPED IN THE FRAME UNDER THE HANDLE BARS. HERE IT IS COMPLETE: G5-208573 https://picasaweb.go...feat=directlink THANKS TO THE GUYS @ MXRestoration.COM THEY DECODED IT FOR ME! yAMAHA TRAILMASTER > 1968 YG5T 80 1 Candy Red, Yamaha Black G5-200101--211043 G5-200101--211043

Hi, I have recently aquired a 2000 xj600s diversion which does not have any illumination to the dash area for the speedo and tacho. All other bulbs are working ie, headlight, indicators etc. What type of bulb do i need, how many, and are they easy to replace. Is it likely its a bulb or a fuse which may be the cause? Many Thanks Marc

well heres the plan me and the father take our bikes from scotland to oz visit all the main cities spend a few months driving and expereincing new things but heres the thing we dont no how to? so were looking for some answers on what we need before we go? shipping costs? places to go? things to do? any ideas comments or info lemme no any helps appreciated! thank!

hi all help would be appreciated i fitted hel lines to my 01 fazer today and having bother getting a brake on front wheel lever is soft and spent a long time pumpin lever to no avail back brake fitted and bleed in 10 mins

Hey guys thanks for the advice on removeing the paint off my bike I am starting it today and will try and get some pictures up of before and after