General

Hello, I am kinda new here so please bare with me. I have a problem with my 80 yamaha xs400 mikuni carbs i believe its the carbs ??? the bike is sluggish in the idle to taking off stage or idle to 1/4 throttle also on the right carb according to the plug it is runnning rich now the pilot adjustment is at the factory settings and i believe it is 1 1/4 out (bottomed then 1 1/4 out) still rich real rich im guessing this is why the bike is a little sluggish in the starting off stage it seems to run good in mid throttle range and upper throttle range no new exhaust the only thing different is pod filters???maybe this not sure , also from the look on the plugs it appears…

This is my last post. Bonjour les tabarnacle. If a subject cannot be discussed than it's not worth my time to stay here. Got bigger fish to fry.

Some of you(most will not) will remember this great voice lost to soon at a young age. 1950: The boy in the first video with Mario Lanza is Luciano Pavarotti! These videos are a rare pearl! http://www.videosurf.com/video/the-great-caruso-ave-maria-gounod-51010698 http://www.videosurf.com/video/mario-lanza-santa-lucia-very-rare-51010695

should be takin the xvs bobber out for its 1st test drive on the 11th just got the chain sorted, the rad is on and im sortin out the loom this week so keep an eye out as im gonna try and post a vid (havent done it b4) so fingers crossed it works lmao.

That's one of the most heart warming stories that I've seen in a quite along time. The true spirit of sportsmanship was there that day. http://www.godvine.com/Injury-Turns-into-Inspiration-for-One-High-School-Girl-323.html

Hey folks, Looking at buying a set of excel rims tomorrow!! Just curious (may sound odd but I know a couple will understand) as to how much they weigh? Front and Rear please!! Thanks in advance! Also is there anyone out there who could make an undertray for the DTR? I know it sounds a bit bizzare but I'm out to be different!

I got a couple of packages today of suff I had brought for the Suzi. One was some pattern parts for the far east and were what I ordered. The other was from German ebay. Here is the story The other week I managed to win 2 German ebay auctions from the same guy once I had clarified that he would combine the postage. The auctions only had a couple of bidders. One was for a side panel, 2 chrome exhaust shields and a painted secondary exhaust head shield (one auction). The other was a NOS Cylinder head. A big box turned up today. Opening it up there was a lot of German newspaper in the box. I rummage through and come across an air filter box and cover with the i…

Craig ferguson was a scottish comedian back in the days and now he has a late night chat show on CBS check this out, he's mad features, BWJ on the right

Sportsbikeshop 15% off Weise gear Use code SBSWC15 at checkout Ends 31/3/2011 Well that is the email I just got. It may be beneficial to you.

Hi guys,just would line a bit of info about restricting an R6. I've just passed my mod 1 on my yzf r125,doing mod 2 shortly.obviously I'm gonna be restricted to 33 bhp for 2 years.I wouldn't mind riding a bigger bike (r6) fir the 2years restricted.I'm not the type to pull up at traffic lights and try and race everything in sight I just want to get used to the weight and feel of a big bike,the power will come when my restriction gets lifted,so all I'd like to know is can it damage the bike in any way by restricting it??and is it safe to ride I.e when u pull away would you have to rev the arse off it to get it moving?? Advise please people,thanks

Hey all. I am looking to buy gear at the moment. Need some feedback from anyone who has ahd any experiences however insignificant they think they might be with regards to purchasing of motorcycling gear. I went into a dealers yesterday and looked around at some gear. asked the guy there. He recommended the RICHA Ballistic Set of leathers. They look pretty good. This is going to be my first set of gear as i,m starting out. Can anybody recommend or give me examples of what they would go for and why. I,m gonna go for leather for sure. But just in regards to maybe having this gear or knowing someone who has this gear or simila…

OK guys/gals can we please keep our avatar sizes to a maximum of 120pixels wide.It helps preserve the frames on the forum. Thanks

There was a sight of an orange ball over the UK today. So here is a poll. The question is; Has Spring sprung in the UK?

Hi guys, please use the wanted section

I am looking for these for my bike.... Yamaha Fazer 600, 2001. Do they exist? Where can get some?

Hey guys it's been a while and thats because me and my dad have been working on a new project bike for when I'm 17 and will be using my dads YZF R125 so he bought a 1989 CBR400RR which had been streetfightered and we are currently restoring it back to a stock bike and will then be purchasing a TYGA body kit to bring it up to date (In terms of visual appeasement). Currently what has been done is we've rewired the bike so that the lights all work again and removed the old subframe since it had been cut in half and will be looking to buy a new one soon enough. Personally I am not a big fan of Honda's work but the TYGA kit looks like something especially nice. Pictures …

Its here, 3 positive cases of 'scammel starter button syndrome' showing on the yummy mummies of Loughborough today. More in Northampton Brrrrrilliant....

just been given this link for a motorcycle stand. This baby uses friction to keep together so it can be stowed away when not in use. click picture for link

This is the BSA custom bike that won best in show .It will now goto the Sturgis show. Next year the show will add the Claasic bike show to become the International Custom and Classic bike show. Our Stand We are running a frame building course over Easter ,check out the scale model of our frame jig in the last pic, built by us last week for the show.

Hello Good people of the forum............I'm back Been away from the forum for some time and just want to say hello to all. Hi to Rdly, Yamahead, Mervin and the boss Alex if he's around Back on two wheels in the form of a FJ1200 (1993)