Naked

what would be the cheapest way out for me. i have a 93 yamaha yzf 750sp with 39mm flatslide carbs that i was going to take out and rejet! only thing ive done is clean the carbs and put back on the bike to make sure it ran! and i dont know anything about sycronizing the carbs, but was told that there is a tool to do so! and since i clean the carb and all the jetts once it should be less difficult for me to rejet it right!

Hi I have a 1993 YZF 750r which at the moment has a 180/55 rear tyre and i was just wondering if i might be able to put a 190/50 rear on it

Im upto 1600 miles on my new machine commuting in and out of london, got it before the cold months closed in so i've got some good road experience before the summer fun months......although i have a few questions if any one can answer this little quiz, there's prizes of course!! 1) How many miles do you think i'd get on the final trip/ reserve fuel allowance? 2) Is there an easy fix for the bad steering lock key position/ conflicting with the clutch cable? 3) Anyone know of a good seat replacement for the longer journeys?? Gel filled maybe? 4) The best accessory shop for us is......? 5) A decent undertray (painted)? 6) Colour matched rear Hugger? 7) Any other lit…

Does anyone have a haynes manual to hand for one of these. I'm changing the fork seals this evening and need to get some fork oil. I'm hoping to get some at lunch but being a knob I left the manual at home so don't know how much to get and what grade.

Hi, I'm new to Yamahas and have recently bought a 1996 FZR600R, the old foxeye model. I want to change the fork oil, can anybody tell me the correct amount and grade of oil per leg? Thanks very much.

Does any of you guys have any idea when the TDM900 is changing model? Its basically the same as when it was introduced as an injection bike back in 2002

HI ALL, here's a little teaser for you. unfortunately i had a rather surprising encounter with a large lump of concrete halfway around a right hander on saturday and took a chuffing great lump out of my front rim! was wondering if anyone knows if a set of R1 wheels will fit on my 2001 FZS Fazer 1000 and if so what year R1 wheels can i use? Kind regards to all Tandy

I'm needing two new silencers for my XJ900.The cheapest one i can find so far is a Motad full system for £250. Its only the silencers on my bike that have had it so i was thinking of getting some universal cans to fit on instead.I found a really nice pair on Ebay brand new for £70 which is not bad. Would i ruin my bike if fitting these on?

Hi.... hope everyone is ok... could anyone help me with the Yamaha Paint code for the metallic blue used on the 2008 (with gold wheels) R6?... I want to get my Arai painted the same colours as my bike but I haven't had the time to dig out and search for code numbers, any one help? many thanks!!!

hi is ther any1 outther that can help me i have an r6 1999 that came with a YM4 immobiliser and my key fob to disarm it just stoped working. . im having to use the Back up card to disarm it and does any 1 no can i code the fob again?

Ok, my FZR600 Genesis has a Pass button on the left handlebar - What does it do? I'm guessing its a flashing button to save switching between low/high beam. Does it only work when travelling as I've tested the button from stationary and it does nothing.

hi all new to this site hope someone has a far bigger brain than mine (not that hard) my 1100 bulldog has the built in siderails but i want either a small carrier with a rail on or a grab rail on the back.or a new wify because she aint happy clinging on by her buttocks.any ideas?

I've had my YBR125 for 2 years now (June 07) and was wondering if there is anyway to destrict it or just make it go faster lol, I'm heavy but get 60 mph out of it but nothing more. Thanks

hello out there i have recently uncoverd my 86 fz600 to find out that somehow the fairing on the left side craked from top to bottom..i was mad at first but know i want to change them all to something newer i want to get rid of the box look and go for the newer round look..but i have no idea what year fairings would fit on mine so could someone please give me some info i really don't know what i'm doing so any help would be greatly appreciated thank you my e-mail is [email protected]

HI I'VE GOT A 98 THUNDERCAT IT'S STARTED MISFIRING AT 6000RPM AT IDLE AND 9000RPM UNDER LOAD (ALL GEARS) AT BOTH TIMES THE REV COUNTER NEEDLE DROPS TO ZERO FOR A COUPLE OF SECS THEN BACK UP? IT'S A CONSTANT MISFIRE AND WON'T ALLOW THE REVS ANY HIGHER SOME SORT OF INBUILT PROTECTION/FAULT CODE? I'VE FOUND A THREAD ON ANOTHER FORUM OF SOME ONE WITH THE SAME PROBLEM BUT NO ANSWERS? ANY HELP REGARDS PHIL

http://www.motorcyclists-online.com/o1_750...e-pictures.html A retro special, looks a lot like an XS650 only with a V twin. Best lookin Yam since the demise of the XS650, and I would get in line for one. Did they decide to just not make it?

Allen bolt/ PIN is stripped and Im having a terrible time locating this part. All part searches show a pin that does not have threading. The local dealer also just refers to the part in the Yamaha online micro fish where its shows just a pin and clip. I looked for a used caliper online and also see this, its listed as a 89-93 but has pins Anyone familiar with this type of pin and what bikes have them? Are their different types of pins that Yamaha uses? Please anyone with a 1992 FZR help

hi all, Ive got the chance to get a 1999 TZR125R, but am not sure what to look for on it, other than the obvious signs of damage, crashes etc. Do TZR's have kown problems with them, if so what are they? Its got 10,000 miles on the clock which to me seems too little ( ? ) and has been resprayed which worrys me about a possible crash? Just looking for any buying Advice on TZR125R's and sports bike generally. can anybody help Cheers <>Chris

I've got myself a set of blue spot calipers to go on the front of my FZR600R and was wondering if the rear blue spot will fit too. I know there's no need to change it but I would like a matching set of calipers if they're an easy fit. Also I went into my local Yamaha dealer at the weekend to see how much a seal kit for the front R1 calipers was and nearly shat myself when I was told it was £100 for 8 rubber seals (robbing scumbags). If anyone else is reading this and needs some go to www.wemoto.com they do them for £30. They are obviously pattern parts and I've not used them so don't hunt me down and kick me in the nuts if they're no good, just trying to help out

hello everyone! I'd like a help from you. I have a yamaha dt125x and i'd like to change the speedometers. I'm interested in buying a digital speedometer but i don't know which one to buy (the specifications needed). Can anyone help me, and tell me what model fits this bike? it's really urgent. sorry if i can't explain myself but i'm portuguese, my english is not very good... thanks all of you