The Bar

And today its Choppernorgate, many happy returns That PM you sent me Choppernorgate was a good idea too, no-one has sent in a request before, think you might have started a trend here, anyhoo here it is (jeez I feel like Dave Lee Travis)

I want a new helmet. I've had my current one for a few years and its scuffed and scratched, it's also been dropped a few times I had a dual sport which I liked but it got nicked. I currently have a moto x style one but I want to get a full face. After looking at all the options I just don't understand safety wise what the difference between is from a 50 quid to a 1000 quid helmet? Is buying a cheaper helmet dangerous because they are not as strong etc?

i know the rs200 didnt sell that well in the uk but cant find a solo seat for one anywhere, probably the rarest seat in the world !!!!!

So basically I'm going to get straight to the point, 2013 yzf 250, will it fit in my friends Vauxhall convo van? It's on a 54 plate, any more info just ask

hi anyone know where i might find a solo seat for a rs200, kindest regards ian.

Christmas is coming up and my parents have asked what I want, I really need a new set of tyres for my yzf 250 as they're worn, as I'm no expert in picking out the best parts for my bike I once again ask the great people of this forum! So a new set of tyres is on the Christmas list, what tyres are worth asking for? I ride woodland quite abit and is really mucky so I'm looking for some big nobbly tires. Also in really struggling on finding some blue and white graphics for it (my kits blue and white so I want it to match) any websites that you can suggest to me? Thanks a lot

Hi, I am tearing into my 1983 Yamaha XT125 and need to pull the flywheel. I already have a 27 MM flywheel puller for my DT175 and others. It is too large to fit the 83 XT125 flywheel. I have searched everywhere and all I can find are 27MM flywheel pullers listed. Does anybody know the correct size flywheel puller for this bike and if so where I can get one? Thanks in advance. -Tony

Hey everyone, So I'm new to the forum, haven't had my account for long, and I was looking for some advice. I currently own a 2004 XVS 125 Dragstar, it's my first bike and I'm using it to practice until I get my full license. Recently the engine stopped firing on the front cylinder, I started the bike and could tell straight away that something was wrong. Me and a mechanic friend had a look and found that there was no spark on the front cylinder. At first we thought it might have been the coils but they were fine, then we had a look at the Ignition Control Module as people in a few other forums had a similar problem and this is what they pinned it to. I tried m…

Out early......destination was the Castle in Vélez-Blanco, Almeria! Riding through Orce.......and then onto Maria crossing into the province of Almeria from Granada! Parked up at the foot of the Castle....I was the only one there! And here it is in the background! Now here's the story of the Castle itself! Culture Alert! Castillo de Vélez-Blanco is located in the municipality of Vélez-Blanco, province of Almería, in the autonomous community of Andalucia, Spain. It was built by Governor of Murcia, Pedro Fajardo, 1st Marquis of los Vélez, following his appointment as Marqués. He set the headquarters of his new dominion by undertaking the constructi…

Well here i go again with this one, i know i have said it before but it will definatly be happening next year. Im looking at selling up Betty and getting another bike, its not that i dont like her any more (i love her to bits) its just that im bored of her now and just want a little more grunt for my buck also it will be nice to see someone else enjoy her as much as i have. Now the bikes im looking at getting next are: Harley Sporty 1200 (pre 2005) Harley Ironhead 1000 (found a 1984 one im in love with but needs work) XVS 1100 (looks too bulky for me tho) Vmax (not sure how long id keep it tho as its not my style, i just want one ) Kwakimakie VN1500 XV 1600 …

I must stay off gumtree..here are a 1981 DT125 & 175 for sale for 420pounds for BOTH. Both good running condition but neither has papers. They still look very original...soooo tempting...but having 5 DT`s really getting bit much.

Hi Recently bought a second hand ybr, got it a bit cheaper as it failed its mot due to a loose headlight fairing. Wondering whether anyone knows if its possible to convert it to using the round headlamps. If not where I can buy replacements for this model, I can only find bits for the model with the round headlamp Cheers

for peeps who store their bike over Winter, ethanol fuel attracts water and rusts the tank, leaves residue in carbs and rots rubber. Aspen fuel is used to replace this over the winter and is stable for 5 years according to the importers. no idea of the price though http://www.aspenfuel.co.uk/dealers/dealer-locator/

Hi all Obvious ones are contact police and insurance company. Anything else, with the hope I might retrieve it? Thanks!

Hey guys recently had a small crash on my ybr. Bike was fine but the only problem was I broke my clutch lever. I bought a clutch lever online which came with a new clutch cable, so I decided to change the old one. Changed the clutch lever/cable no problem. I was riding it for a week or so back and forth to work with no problems. Then one morning I tried to ride it. Jumped on and pressed the clutch lever and there's nothing there, no resistance at all. I've adjusted the cable at the lever and the midway point on the cable to there loosest setting but it didn't make any difference to my clutch. I don't understand why this is happening, anybody got any ideas/ advice? p.s I'm…

Scary sights. I will kick off with one I witnessed on the motorway today. Nothing special annonymous 500cc something. Lane 3 doing a good 70+ running with and between traffic. Wearing..........visorless open face lid with sunglasses, wife beater vest and I assume budgie smugglers (either that or he was nekid from the waist ) with deck shoes. Can you imagine the mess.....I thought I was being reckless leaving my overtrousers off. Must be some more scary sights.......

Never hurts to give it a generous treatment with Muckoff and a soapy wash so she's looking the dogs dangelies. Should be all good .... famous last words.

I recently purchased a 1986 radian with no carbs, I have been looking everywhere and cannot seem to find them. Are there any places I could possibly have an easier time finding them, or are there any other compatible carbs for this bike? Any help would be appreciated.

Hi peeps. I'm still trying to find parts for the FUCR, mainly the top yoke, the dimensions I need are 35mm stanchions, with 19cm between their centres and 5cm from the stanchion centreline to the stem. I already tried XS400 ones but stem fell about 1cm short of what I needed. Sorry for the crude diagram, but it gets the point across, I'd be very grateful if any of you peeps can measure up yours (giggity) and let me know if any of them would be likely to fit.

'Borrowed' from another site. https://www.flickr.com/photos/bcgreeneiv/sets/72157600755463552/page4/