The Bar

Ok just for those that don't know, bought myself an FJ1200 a couple of weeks ago and I am in the process of tearing it down and refurbing it. So far I have 4 sheared bolts that the PO has kindly left me and now I have added 2 more in the stripping process, they all are sitting flush to the various mounts and things so nothing to grab hold of and was trying to think of the best way to get the buggers out, remember these are as rusty as F**K so they are not going to come out easy, thought that I might cut them with a slot with the Dremel and use some heat and plus gas to get them softened up but other than that open to suggestions. I have a welder so could try welding a bol…

Only 364 days to go and I have no idea what to get the mrs!

as the title says im after some pointers on chain care do you clean off your chain before re oiling it..how often...what type of oil do you use? / my bike is only used for pleasure so isn't out in all weather but still want to keep my chain none the less thanks in advance...oh and happy Christmas everyone

So had my new bike delivered yesterday, unfortunately not a yam, am I still allowed to talk about it?

Hey everyone, I'm after abit of advice please, had my xj6n for about 3 months now and I have her all tucked up for winter and the battery is sat somewhere warm so I will not be starting the bike until about February, is there anything I should be checking come feb to make sure it's okay? I also plan on doing some work over winter to get it how I like for summer Current parts I have are : Scorpion exhaust Evo tech tail tidy Rear huger And a couple of other bits to tidy it up abit I was hoping someone would be able to help me with his next bit, I was after some advice to know if I could fit the foot pegs of a r6 or would they not fit? And if they would …

I just picked up an 89 FZR1000R for £250. Needs some work, but all there. Got loads of EXUP parts so plan to have it on the road march-ish. got a lovely SP Engineering end can on it, a new chain (still in the packaging), 2 new tyres, had oil and filter before being taken off the road, blokes back has gone. They are starting to appreciate, so hopefully fix up the top fairing (i have the same one, unpainted, someone gave me), insure it (£98 with no NCB) and have a usable classic. The only worry is my garage is now full to the brim....

Hi all, happy xmas & new year. I wont be using my xj6s much over winter so was asking in stead of storing for a few months do you think it will be ok to start up and run once or twice a week till I need to use it.as I don't want to put it to sleep for so many months. Many thanks for all reply's. cheers xj6s.

Hi all Just wanted to say happy Christmas and a merry new year before I am too drunk! Just a quick pic for Kev!

Hey can any one recomend a good powder coater in kent I want my dt frame an swing arm powder coated but don't want any old cowboy touhin my beloved bike if any one knows any one who they either no or have had work done by them please let me no thanks

hi ive just checked my tool pouch on the bike and theres no rear shock adjusting tool with it,i rang my local yammy dealer and they don't actually sell then seperate(you have to buy the whole tool kit at £51...sod that )he even said the bike may not of come with one in the first place now ive seen a few on ebay but they're all different sizes so could anybody tell me the correct spanner size or even where to get one from?? thanks

Hi guys. I've noticed my bike doesn't have a carb because it's a fuel injection engine. Can someone explain the pros and cons (is this why I can't find a choke?) btw the bike is going really well. I'm finding surprises on it everyday. I'm really impressed with all the quality parts for example the Brembo brakes are amazing, they are nearly too good.

Been a wile since been on this Been of bikes a few months now But picked up a new bike today and cant wait for some good weather to get back out

Merry Christmas to one and all. Can anyone advise the mechanics of the oil level warning light - ie what is the mechanism for making it come on. Mine has started to come on even though the oil reservoir is full.

Forgive me if a rant or a bit boring but some of you can relate to this Had my first crash today on black ice. Traveling down a country road, approached sharp right hander, no indication of ice as it was sunny and warming up. As I started the bend i was instantly planted on the floor making a physical check of the tarmac listening to the slide of the bike going westward. As soon as i hit the floor, in an instant I managed to think of a few things: WTF???? Bikes gone, shit I'm off Why am I off? God damn I can feel sheet ice below me I'm okay, just sliding i remember no cars in area, just wait till i stop (at stop) mental checked myself over before moving - no pai…

Can someone please assist with plans or ideas to fabricate a hitch for my Dragstar?

Very excited... I have a few days off work and have been given 'permission' from the other half to go away on the bike for a few days before Crimbo, yay!! Just need to plan the detail now... Nothing like an impromptu trip away on the bike. Very excited, ha ha!

passed my mod 2 today...buzzing!! cant wait til the weekend to get the xj6 out ...this is where the real training begins...as they say

Hi everyone can you please help I am in danger of stripping my x-max down to parts. I am trying to do the simple task of replacing the headlights on my 2006 x-max yp250r. I have removed the Cowling from the front of the scooter as directed in the service manual (2 scews at the top and one at the bottom)this does allow me to get my hand in to touch the wire connecting to the bulb but this does not seem to provide enough access to change the bulb, I am therefore assuming I have not removed all of it. Has anyone out there done this and can they confirm that you need hands like a 5 year old to access and change the bulbs or have I just not removed what I should have. Pl…

i was just wondering if any 1 could help me i receantly brought a yamaha sr125 on a 94 reg but noticed the other day oil dripping under the engine anyway traced it to the air filter box and when i opened it there was quite alot of oil in there what could be corsing this and is it a major problem if any 1 could let me know that would be great

I've always wanted one and am on the verge of buying one but, people keep saying that they damage your bike, especially the chain.