mcferreira100 Posted August 11, 2013 Share Posted August 11, 2013 Thought this couldn`t be fixed but gave it to friend with lots of patience. The tripmeter shaft was bent and couldnt turn. The face looked like a dog`s breakfast and there was glue all over the mating surfaces showing previous owner had tampered with it. After the repair. He did a nice job. Never think these gauges can`t be fixed. Link to comment Share on other sites More sharing options...
Moderator Airhead Posted August 11, 2013 Moderator Share Posted August 11, 2013 Result Link to comment Share on other sites More sharing options...
bpchura Posted January 2, 2015 Share Posted January 2, 2015 Hey, do you have any advice for getting into one of these without mangling it? And a good way to get it back together? Link to comment Share on other sites More sharing options...
mcferreira100 Posted January 2, 2015 Author Share Posted January 2, 2015 My advice is if you don`t have patience don`t try it..I gave mine to someone with plenty patience to fix. There`s no other way but to carefully break them open using a sharp Stanley knife, do the repair inside and glue back together again. The workings inside require even more patience and very small tools to get sorted. 1 Link to comment Share on other sites More sharing options...
Recommended Posts