chrisp

You have a UK spec bike by the sound of it. The ignition switch for the UK models does have 10 wires, in two blocks, a six and a four. Good luck on finding an ignition switch, they are as rare as hen's teeth. You can use the switch off the 100, 125, 175 or 400 models off the UK 75/76 models though so keep your eyes peeled for a breaker. Chris.

I'll have a look on Mine :-) What colour wire is it? i know there is a spare wire, depending on whether you use the daytime or night charging circuit. is it it either green or green& red? I have a colour diagram i can e-mail you if you want. (its too big to upload here) also found the chassis dating info: your bike is a 1972 DT2 : DT2 Year: 1972 Start Engine#: DT1F-105101 So it will be ither silver or orange Chris.

I'm restoring a 1973 DT3, (see my pics in "new member" or other section here.) Very rare bike in this country, though andy at Yuniparts is bringing bikes in now. I think he's selling a DT3 for about £2000 ish. Mine was in such a state i've had to replace everything so it will be more of a recreation than a restoration. Let us know how yours is progressing!

Yep its either a '72 0r '73 DT2 or DT3. it's obviously been repainted at some point in the past, and the oil tank is missing the "tourque induction" emblem, but my money is on it being one or either of those. There's only minor mods between the Dt2 and 3 so the vast majority of parts are interchangeable. look on US ebay for parts books which will be a great help to you.

yes, if you can post the chassis number an accurate date date can be arrived at.

My crankcases also say dt1-f, and its a 1973 DT250 DT3- do you have any pictures or bodywork? what colour is it? Almost nothing exsists in the UK for this bike, get everything from ebay U.S

I think not. The early at/ct/dt models had exhausts which emerge to the right hand side of the bike, while the later models have pipes which go under the seat and come out on the left hand side...i could be wrong, but search google images to be sure. Chris.

Some parts are indeed like hen's teeth, and when you do find them its silly money (i paid £170 for a NOS l/h handlebar switch). The main problem is that a lot of the parts are country specific, particularly electrical bits. I've never seen an ignition switch, for instance, though i'm considering having a batch made as i have one off the 175, and its the same as the 125, 250 and 400 models too. Andrew at Yuniparts now has a stock of wiring looms and lots of other hard to find parts made (l/h handlebar switches coming soon, i think)so life will get a little easier. Must become a paid up member here so i can beg for parts!

I like these 70's TS bikes. Glad to see parts prices seem to be more reasonable than the DT's. Hopefully I'll have the 175 up and running soon....

This month's CMM has an article on the XT range.

That's looking like a cracking bike John. My 175 is in a slight state of disrepair now, as i'm going to rewire it along with doing all the other "little" jobs! How have you mounted the number plate bracket? on that funny little plinth thing or is it a different mounting? Chris.

I think the car your'e referring to is the green one with the white roof. It's a 1950's MG Magnette. I bought it when i was doing a course in vehicle restoration at college. Needless to say its nowhere near finished!

Agreed! my dt250 DT3, because of the state it was in (see my post) is more of a recreation than restoration. I'd estimate more than 90% of the parts used are NOS but i will definitely ride it and use as intended, i'm not precious about it at all. I'm not going to be trailering it to shows in a heated van with carpet, it'll be ridden with muck and dirt wiped off if appropriate!

Hi TTB, The DT3 tank is competition green. I struck lucky (if my bank manager would call it that) and found a NOS tank in the US. Bought it for $600, just over £300 at the time....the tank that came with the bike was u/s so had to find something. It's been resprayed in the US by the business i bought it off and is stunning.

Hi john, i think i'm ok for those bits, really need an ignition switch though! Glad to see ytou in last months CB with your kwacker....nice one!