tommy83 Posted December 13, 2007 Share Posted December 13, 2007 Just bought a 2nd hand micron race can & linkpipe for my 96 yzf750 off ebay. After fitting will i need to set up/tune the engine to the new exhaust? Will it affect the exup valve, the way it works & the way the bike runs etc? Any advice will be appreciated. p.s. i'll be adding pics of my bike this weekend Link to comment Share on other sites More sharing options...
yoda Posted December 13, 2007 Share Posted December 13, 2007 Assuming that the baffles are still fitted, then no but it might be a little lean on the mixture. Most exhausts are for looking not performance. Link to comment Share on other sites More sharing options...
Willenium Posted December 14, 2007 Share Posted December 14, 2007 Probably benefit from rejetting the carbs but it's not critical. I've got a custom race can on my bike and not bothered fiddling with the carbs. Link to comment Share on other sites More sharing options...
tommy83 Posted December 14, 2007 Author Share Posted December 14, 2007 There is no baffle. Link to comment Share on other sites More sharing options...
yoda Posted December 14, 2007 Share Posted December 14, 2007 There is no baffle. How will you get it through the MOT? Link to comment Share on other sites More sharing options...
diychap Posted December 14, 2007 Share Posted December 14, 2007 How will you get it through the MOT? Mine also gets through MOTs with no baffle Just need to go to the right place for the MOT Link to comment Share on other sites More sharing options...
Willenium Posted December 15, 2007 Share Posted December 15, 2007 My Akrapovic goes through an MOT with no hassle at all even if it did seem louder than usual on the day. Getting through on a stubby would be trickier and I decided not to risk it. Changing the pipes over doesn't take long so it might be worth just checking with the tester and swapping it for the MOT if it's too loud. Link to comment Share on other sites More sharing options...
Recommended Posts