HoggyF Posted November 26, 2008 Share Posted November 26, 2008 I'm sorting out the wiring on an 85 XT350 which was a field bike for a short spell - no its not that bad! - most of the loom is still there but has been hacked about some. At preset there are the wires coming up from the engine to the CDI and coil and to the stop button but nothing else. When i traced it out the wiring diagram it shows 2 x "control boxes" and 1 x appears to be under the clocks on a set of clocks I've bought. The engine runs without the second box being wired up so what does it do? Link to comment Share on other sites More sharing options...
junkyardblacksmith Posted December 1, 2008 Share Posted December 1, 2008 Here's a link to a service manual for an '85 xt350. Last chapter is on the electronics. Might help with your problem. http://david.alfa-romeo.eu/Motorcycle/Yama...amaha_XT350.pdf Link to comment Share on other sites More sharing options...
Moderator Airhead Posted December 1, 2008 Moderator Share Posted December 1, 2008 Here's a link to a service manual for an '85 xt350. Last chapter is on the electronics. Might help with your problem. http://david.alfa-romeo.eu/Motorcycle/Yama...amaha_XT350.pdf This link isnt working! Link to comment Share on other sites More sharing options...
junkyardblacksmith Posted December 2, 2008 Share Posted December 2, 2008 Sorry.. correct link here: http://david.alfa-romeo.eu/Motorcycle/Yama...amaha_XT350.pdf Link to comment Share on other sites More sharing options...
Recommended Posts