JORDAN-432
Free-
Posts
30 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Yamaha Racing News.
Media Demo
Store
Collections
Classifieds
Everything posted by JORDAN-432
-
the grips lol
-
LOL
-
whats the standard needle poisition for my dt125r 2000
-
is it ok just to buy the rings or should i get the whole piston kit? Nothing is damages just would like to put new rings in
-
no didnt go that far, i was going to split it as i thought there was a problem with my gears were inside the gearbox but it turned out to be the gear selector shaft.
-
well when i rev it over about 3k it vibrates quite bad. An unbalanced clutch is when the plates inbetween the friction plates aren't balanced because a bit of the plate has been taken off so you have to put them in evenly. I put them in as evenly as possible but just not sure whats wrong with it and thought this could be it.
-
i recently had my engine out because the gears weren't right so i sorted that, now i think that the clutch is unbalanced. can anyone tell me the symtoms of an unbalanced cluth please.
-
i dont no where i disconnected them from , i thought it would say it in the haynes but i guess not.
-
hi, ive just put my engine back in and theres 3 black pipes coming from the carb can u tell me which one goes to where. Thanks.
-
would i have to split the engine get to this
-
When i go into first or am going down gears when i push the gear lever it dosnt spring back up so i have to pust it up with my foot. anyone one whats going?
-
to much air of maybe an air leak if the chock has to be on all the time?
-
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200466051141&ssPageName=STRK:MEWNX:IT There you go
-
Does any one no the width of the standard manifold.
-
Start big and work my way down. Not 100% sure im going to get 1 yet thou
-
thats a pwk carb its a copy of the Keihin carbs but just much cheaper and are near enough the same. http://cgi.ebay.co.uk/KOSO-30mm-FLAT-SIDE-CARB-PIT-BIKES-150CC-160CC-200C-/230465082895?cmd=ViewItem&pt=UK_Motorcycle_Parts&hash=item35a8ca160f dunno if it will fit, if it dont ill make it lol
-
im thinking of getting a 30mm pwk flat slide carb, just wondering what improvement would it have?
-
Thanks appreciate that guys
-
so basically i disconect the indicators indicator and it will stopp all the indicators flashing at the same time which ever way i flick the switch. sorry just want to make sure
-
Thanks, so by taking the light out from the clocks is it just as simple as it sounds
-
on my dt i bought some smaller indicators and just connected them to the wires i disconnected the old indicators from but now what ever way you switch the indicators they all come on. please help.