New Members Welcome Area

Hi everyone, I’m an old biker returning to ownership after a few years bringing up kids with a bike-resistant Wife! I am converting a nice (my2000) 1100 Dragstar Custom into a bobber and wondering what tyres are available for a 110/90 R18 front wheel? Not many it seems and I was hoping to find a whitewall matching set! 🙄 If anyone knows of a WW set for this model, please let me know. It’s good to be here! cheers Chris

hey all. well the title says all really so what u think I have done 30 mile runs and all ok so I'm thinking hitting 40 miles at time with a nice 30min cool down advise ideas welcome

I’ve picked up a Diversion XJ-F with 17k on the clock. The Divvy was looking a bit rough, a bit neglected and in sore need of some pennies invested. All is done and I have a very smart looking bike, a quick check online reveals I have a boring commuter bike only worthy of a few trips down the bypass and nothing more! I am amazed because I only use bikes for fun and only travel straight roads if no other routes are available and this little Yamaha does not disappoint! Admittedly it needs a little encouragement but keep the motor between 7k and the limiter and she pops along very nicely indeed. The front brake needs a good pull but the rear is great and the gearbox is super…

Hey I'm a new member living in dagenh essex and a learner on a 125 cruiser, I'm looking for a group to ride with so anyone interested lets know.

im looking to put a 250 engine in my 125 frame do anyone know if there is anything i have to change to have this done

Hi I,m a new member , I have an xvs 125 & would like to know where i can get a smaller rear sprocket as i,m struggling to find one Thanks guys

Hi, I am new to this site and joined to try and get some help with my bike. I bought a 1300 XVS Custom (Stryker) in February. The bike rode well but sounded too polite. From videos on you tube i seen a few people has drilled holes into the end plates of the exhausts to improve the sound. However since doing this the bike runs erratically at low revs and stutters and shudders when turning throttle. Is this a simple tune up job for a Yamaha garage or is there anything else i need to do ??

hi guys! my name is keali'i, Hawaiian/Filipino that grew up around motorcycles! ive always loved them in general and first rode my street legal bike when I was 13/14. 600 Yamaha yzf! and now I have my own café racer (1987 Yamaha fz600) and im loving every aspect of it!. im from Stockton, CA so if your around this area and wanna ride shoot me a message! thanks guys! later!

Hi, Mark from London, knocking around on an 02 Sr125 atm - my 1st geared bike in 17 years.!.

hello ive just bought a 175 enduro of a friend he bought it off orginal owner and he took engine out to repaint but never did anything the thing is it is very orginal never touched everything is as left factory the fram is rusty but untouched i think i should just put back together and not paint anything or am i just been silly is it just another bike that needs stripping and painting he has slighly rubbed tank and fram down so any ideas what direction i should go engine and frame number is 002462 is this a early or late model,i would like to post some pictures but cant find out how to if anybody can tell me i will thank you ,rae

I have a 1960's yamaha 80cc bike, is red in color and has upswept pipe on right side. Fork tube covers are retangular in shape which I can find any pictures of bikes with these. Tank has round yamaha emblems, also throttle cable runs thru handlebars. I think its a 1965 YG1. Any help with what this bike is would be great. Thanks Ray

From a pile of parts I have built a basically running "cafe" style bike. in order for it to be 100% i only need one part. the carburator insulating gasket. this is the gasket that mounts the carb to the cylinder head. this is the bike and my project car.

Hey everyone, I have been the owner of a 67 Yamaha since 1991, and my Aunt owned it for 13 yrs before that. I recently finished a restoration on it.

Hello everyone, I am new to motor bikes and have no idea what is going on with my bike. My bike is spitting oil out of the exhaust pipe and at the top of the pipe where it connects to the engine (as well as white smoke!), this is following adding oil to the crank box. Hope someone can help, this happens every time i add oil to the crank box like it needs. Any ideas on how to fix this issue? <a href="http://tinypic.com?ref=f2lp8x" target="_blank"><img src="http://i40.tinypic.com/f2lp8x.jpg" border="0" alt="Image and video hosting by TinyPic"></a> <a href="http://tinypic.com?ref=21enls4" target="_blank"><img src="http://i43.tinypic.c…

Hello all, I have started a new membership since my email has changed. It's now [email protected]. I got my YAS1C started this weekend after restoring and fixing the leaks in the gas tank and replacing fuel lines, etc. It is smoking terribly periodically, which causes the engine to misfire and sometime die. From what I can read this is likely caused by the crank seal leaking. Make sense? Any help on where I can find a replacement? Also need to rebuild the oil injection pump (I think), so will be in need of replacement parts for the oil pump as well. Any help you can provide with sourcing these parts and their replacement would be much appreciated. Thanks!…

I have acquired a 1970 yamaha h3d. It's a 2 stroke 90cc. This information is going off information yamaha gave me from the vin number. It has been sitting for 20+ years. The restoration is slow but is going fine parts are hard to find for that exact model but have been sourcing parts off various other similar models. Just wondering if anyone knows where these bikes were released and if there many made or if they are called another model because all the parts websites I have found do not list this model any info would be great

Would like any TECH help & leads on parts for my 1972 Yamaha DS7 250.Looking for tank badge L/R,Seat cover,Headlight ect

Greeting! I bought my Yamaha new 40 years ago. I have 2600 miles on it and runs great. I think I need rear shocks since it starts bouncing at around 50 mph so I was wondering if anyone had a line on where I could get some.

My name is Doug and I could really use some help with some specs here. I need to know the torque setting on the head bolts when tightening it, and how tight do you tighten the bolts on the pressure plate. Does anybody have a service manual they would be willing to part with for this bike?

Need a fly wheel puller for my ct3 Yamaha What is the thread size and is it left hand?