Dual Sport, Offroad Bikes

Hi, By accident I threw away the oil line that attaches just above the oil filter cover and runs up to the back of the engine just below the head. I have a photo but haven't figured out how to attach yet. By my description, does anyone know what this part is called and where I can buy one?

hi everyone I restored a yamaha gt80 and I've heard people say they're not worth anything. but I've looked on kijiji and eBay and I found 8 of them for sale (in all of canada) and 1 complete bike in terrible condition on eBay for 999.99$ (totally ridiculous) but how can these bikes be so invaluable if they're so rare?

Yamaha XT350 97. Went from mid 2nd gear to 1st without clutch (was an accident as im still learning). Rode the bike fine for the remaining 200m home, bike was fine or it seemed fine when I switched gears. after stopped bike wont go to neutral. Ive tried a few times, but it stays in gear. Any Ideas please?

Just started stripping my 78 DT and need some advice on spare parts. I need swing arm pivot bushing the long steel one, nylon top hat bushings and the chain roller. Also the monoshock pivot pin ( the one with the split pin ). There is a kit for the swing arm available a Yambits, has anyone used it ? Can't see the the pivot pin on Yambits. Do Yamaha still stock these parts ? Andy

How does it stay in the front wheel hub? No bolt/circlip just an o ring? or is the wire cable guide on the fork supposed to hold it in place? Regards Simon

Hi all :-) Does this site still exist as I am having trouble finding in Google search??

hey guys I am looking for a carb intake boot (for a reed valve) yamaha dt175 reed cage that has a 40mm carb flange (want to put a 34mm mikuni on) anyone know if the RD350 reed block is the same size as the 175? I dont imagine it is but I know the 350 uses 34mm carbs

When the ignition is turned on no lights come on anymore and you can't here the power valve, Also recently it starts fine but smokes a lot ! When revved and the glass to check the engine oil the oil is a red but is frofy Also from the overflow pipe there is red oil poring out, not sure if it's 2 Stoke oil or engine oil ? But after a couple of seconds black oil comes out and mixes so I'm not sure what oil it is Can anyone please help me ? Sent from my iPhone using Tapatalk

Hi guys ive just brought a 1991 dt125 ive started to strip it down and seen there wasn't a traditional power valve no cables or servo ive been looking into it and seen some came without a servo and just have a fixed valve but when i came to take it off its missing lots of parts and is just spinning around cant seem to find any diagrams or parts for the model without a servo so am kinda stuck with what to do keep trying to find the parts i need to fix it in place or convert it so its got a servo type but not sure what i would need to do any advise on this subject would be much appreciated thanks Luke.

hi chaps, new to the forum, im trying to find some pics of the tiebar setup for my tdr as mine doesnt have one, please please pretty please thanks

Everyone I have battled and battle and battled with my 78 dt 175 and I cannot figure it out. The bike starts easy however this is all it does the idle sounds terrible and won't take any throttle at all it just makes the bike die. Here are my thought : the idle I currently have the wrong piolet jet in the carb because I just found out after a year of having the bike,bit has a 79 carb on it and when I got a new piolet jet I got one for a 78 that part is on the way. Bike not taking throttle: so after realizing the carb deal I realized I was missing a rubber o ring the seals the main jet... Ordered yamaha ones not here yet but I had a o ring that seems to fit... Didn't change…

Hello all i would like some advice on my wr125. Would it be worth me changing my air filter for a non standard. So something like pipe and cone. Sent from my iPhone using Tapatalk

Thank You everyone who has helped me so far its much appreciated. And i find my self in need of more advice lol. I have the wr125 r and would like the wr125 x supermoto wheeles and tyres what size wheels and tyres do i need and were best to get them from. Sent from my iPhone using Tapatalk

is there a source in the uk for spares, I need front and rear mudguard and rear silencer, plenty in the us but I think when you add post and tax it will be expensive cheers

hi guys, my friend has just recently bought an 03 model dt and were both a bit confused with getting it to run properly. the day he got it he rode 25miles home, once home he realised the boost bottle on the side of the airbox wasnt even connected. after reconnecting it i cant get it to idle well, the mixture screw is all the way in and it kind of idles but every now and again the revs build up to around 5k and stay there until you blip the throttle again. the main jet is 240 and i now stock is 210, it has a dep pipe but is it possible for the jet to be too big? i can get it to run and idle fine with the choke on but cant do anything with it off. i recommended that he sh…

Can anyone point me in the best economic direction exaust and new plastics? Regards.

I'm sure you'll all had this problem so here goes, I've ground / wire brushed the old rust the best I can but can I treat them with kurust or something ? I can't risk the inner tube sticking to paint so wondered if there's an accepted method, Dave

Hello is it possible to fit the wr125x supermoto wheels straight onto the wr125r. Sent from my iPhone using Tapatalk

Mine doesn't have one and before I put it on the road I need to fit one, but there seems to be two choices! There is a rubber one, or a nylon one which looks more robust ( obviously ) which is it please and where from ? ps. I've just found a picture of a nylon one with what looks like a rubber sleeve! Is that why eBay shows two types ?

hi does anybody know where to get tdr250 gold rims re anodized in south east area thanks in advance