blackhat250

That awfull, i"v only seen scrap merchants do that, so"s they know if its been tampered with on returns,,

Hi there, yeh parts are scarce , plenty in the USA,, but customs beef up cost ,,

Hi spurs, Never seen this trick machine yet , ..

Yeh the carbs could do with a ultrasonic bath,, varnish builds up if not used regularly , esp with this fuel nowadays ,. i know there a pig to remove on a 4cylinder ,

Hi Ade" ,,, a fair variation you have there ,,

Hi pete, " yeh the cases are easy split, i use the Tusk tool, but the first one i did was with a mallet,,Straight forward job, ..freez the bearings and warm the cases, just drop in new bearings,, the gears put them back in as a cluster, ,cant go wrong three selectors ,,

Its A bit of an Oddball " aquired taste , Ebay is the shop window, that gumtree sucks , as you"l get txt"s and emails from tyrekickers,

Corrrr " the tracer is bonnie,, so is the DT ,

Hi there ,,fine wee strokers you have ,

Start at the coil [Ohms ] then connections ,,then points &condencer, . the soarse coil needs checked ,[ ohms] , Or,,,,you can fit CDI, Lots of systems out there nowadays, i did fir DT400 cdi system on my 250. the flywheels are different ,so need the 400 flywheel . its same fit , just has 4 magnets, for pick-up timing,

Hi graham,,,, i know them inside out,,

Great intro barry , nice old pic too,, you"l have the Dreaded V,A.T to pay before they release the bike,, Shoulda got the seller to mark it down ,,

,To you"s ,,,,,,,

Fit like " am up north east,, tidy that , i had a DT175C in 1976 , and DT400 in 1979. , Were on face book also ,,and DTforum ,, http://yamahadtclub.proboards.com/

Looks the tool slicey ,..

Whats happenned " ,,this used to be a buzzing forum ,, is it Facebook, ? nothing new in posts and very little members visit the site now,,

Hi john , try the aircooled rdclub,, section on there ,and a small fee, will get you a dating cert,, you wont need a N,O,V,A. as its in the EU,,, http://www.aircooledrdclub.com/smf/

Good day to you,, sounds interesting ,,

Smell the oil also " if its contaminated with fuel, the carbs need looked at, this would raise the oil level,

Welcome in Whisper , " aye tiz cold and dreich ,,,

Welcome.. member Plinningas on here has the same bike,,

Welcome in Slavko" ,,,

I use Oregon the chainsaw 2T, oil, or Carlube, , as for the seat, see it you can unscrew the lock from the frame, , or slide the hinge pins out, .

Duno kuba" nice intro " try model specific forum,,

Bigotry on the bike run,, thats a first,, ,Hibees are on the up ..