frostoff Posted January 18, 2006 Share Posted January 18, 2006 Can someone please let me know the colour codes for an RD350 ypvs generator please,or let me know where i can see a wiring diagram. Cheers Link to comment Share on other sites More sharing options...
Bradford_angler Posted January 18, 2006 Share Posted January 18, 2006 There's some RD stuff on here. After a mail the link started working again http://www.smokeriders.com/Technical/wirin...g_diagrams.html Link to comment Share on other sites More sharing options...
yamguru Posted January 20, 2006 Share Posted January 20, 2006 there should be three white wires, all in one block connector, from the charging part of the windings ( not crucial which way these go) a light blue wire also in this connector for the neutral light a black wire which is earth ( rubber mounted engine) on the ignition side of things and feeding the CDI box should be; a white/red wire and a white /green for the pulser coil ( the little one on the outside of the rotor) the a red wire (high speed running coil) a brown wire ( common feed between the two) a green wire (low speed running coil) i can supply resistance readings for these if required but i will need the exact model Link to comment Share on other sites More sharing options...
frostoff Posted January 20, 2006 Author Share Posted January 20, 2006 Cheers M8 Link to comment Share on other sites More sharing options...
Recommended Posts