AlexThomson1994 Posted April 3, 2013 Share Posted April 3, 2013 Hi, I've just gone and brought a new ignition coil and ht lead however it did not come with a cap for the spark plug in looking on eBay there's so many and not sure which one I'll need Link to comment Share on other sites More sharing options...
YPVS TONE Posted April 3, 2013 Share Posted April 3, 2013 Can't you unscrew the old one from the old HT lead and screw it onto the new lead ? If not than this one should be ok if the old cap is angled like this http://www.brandedbiker.co.uk/NGK-Motorcycle-Spark-Plugs/NGK-VD05F-Motorcycle-Spark-Plug-Cap-Black-5068 Tony Link to comment Share on other sites More sharing options...
paulrever Posted April 3, 2013 Share Posted April 3, 2013 or try here; http://www.wemoto.com/parts/picture/ma-7085194/ Link to comment Share on other sites More sharing options...
AlexThomson1994 Posted April 4, 2013 Author Share Posted April 4, 2013 And these caps will fit the spark plug cr6hix? Link to comment Share on other sites More sharing options...
YPVS TONE Posted April 4, 2013 Share Posted April 4, 2013 The one I've listed will fit the "C" prefix plugs which is what you have and also the "D" prefix plugs. Was your old plug cap angled like I've listed ? Link to comment Share on other sites More sharing options...
AlexThomson1994 Posted April 4, 2013 Author Share Posted April 4, 2013 No it had no angle at all just factory cap Link to comment Share on other sites More sharing options...
AlexThomson1994 Posted April 4, 2013 Author Share Posted April 4, 2013 Infact yes it is angles like the one you posted I wasn't I front of the bike I just pictured in my head wrong Link to comment Share on other sites More sharing options...
Recommended Posts