Kelum Posted March 30, 2013 Share Posted March 30, 2013 Hi Guys, My XV125 requires me to choke when starting...this is not a necessity with my other xv125, and was not the case with the subject xv125 earlier.. Once started, I can rev only at high RPM, At low RPM engine gets low and low till it stops.. But when engine goes to stop if I pull the choke it revs up again... There's no air leak at carb joint, am sure about it... As everybody suggested I set Idle screw , doesnt seem to alter the situation.. Am wondering someone , may be at the garaj, someone has toyed with the mixture screw? The reason why I think so is, when engine goes to die at idle irrespective of my acceleration if I pull choke engine revs again, I can rev engine with choke jst like I would with accelerator... Please read carefully and help me solve this...sounds like carb is bad..? Thank u all! Link to comment Share on other sites More sharing options...
Moderator Cynic Posted March 30, 2013 Moderator Share Posted March 30, 2013 Blocked idle circuit thats all. Just needs a clean. Link to comment Share on other sites More sharing options...
Kelum Posted March 30, 2013 Author Share Posted March 30, 2013 Really?? Buddy I cleaned the whole carb with ABRO carb and choke cleaner....right after cleaning even this stayed same... Please highlight the areas I should look into..thanks Link to comment Share on other sites More sharing options...
Recommended Posts