dzish Posted February 7, 2013 Share Posted February 7, 2013 I bought a set of new clutch plates for my DT 80, and I tried to do the change yesterday. But when I remove the old clutch plates, in the basket there was 5 clutch plates and 3 washer plates (between two clutch plates one washer plate is missing) . So I was wondering is it ok to leave it like that, or should I look for washer plate? Worth to be mentioned: one of the old plate (where waser plate was missing), was broken. I`ll put an image when I go home. Link to comment Share on other sites More sharing options...
jimmy Posted February 7, 2013 Share Posted February 7, 2013 Not familiar with that bike, but if it has 5 friction plates then it should have 4 plain plates 1 Link to comment Share on other sites More sharing options...
dzish Posted February 7, 2013 Author Share Posted February 7, 2013 Not familiar with that bike, but if it has 5 friction plates then it should have 4 plain plates You can see the motorcycle Basket and clutch plates are the same with DT 125 Link to comment Share on other sites More sharing options...
Recommended Posts