will harvey Posted March 22, 2012 Share Posted March 22, 2012 hi every 1 posted a problem on here but was told i might get more responce of this page. I have a 96 xj600n and having problems changing down the gears especially from 3rd downwards going up gears is fine recently had new clutch plates and clutch cable been advised it could be clutch needle bearing but if any 1 else has an idea would be appreciated Link to comment Share on other sites More sharing options...
Moderator Airhead Posted March 22, 2012 Moderator Share Posted March 22, 2012 Try a little blip of the throttle when the clutch is pulled for downshifts..it.works wonders Link to comment Share on other sites More sharing options...
Recommended Posts