Will Munsey Posted February 15, 2011 Share Posted February 15, 2011 Hi everyone, Had my WR125 X 2011 for about a week and a half now. got 400 miles on the clock so just over halfway through the running in period. BUT... last night I started having some trouble with my gearbox, specifiaclly when changing down after coasting to a stop at traffic lights. The shifter would move down but no gears would change. I also noticed that the gears do seem quite clunky. Any ideas? Cheers Link to comment Share on other sites More sharing options...
Gas up - Let's Go! Posted February 15, 2011 Share Posted February 15, 2011 Had my WR125 X 2011 for about a week and a half now. <snip> Any ideas? Yes, do nothing to the bike. Take it back to the dealer and let them sort it out. Link to comment Share on other sites More sharing options...
Will Munsey Posted February 15, 2011 Author Share Posted February 15, 2011 Yea I wasn't going to try and do anything myself, would just be nice to know why/what might be causing it for a bit of peice of mind. Link to comment Share on other sites More sharing options...
Gas up - Let's Go! Posted February 15, 2011 Share Posted February 15, 2011 would just be nice to know why/what might be causing it for a bit of peice of mind. It shouldn't stick, but it cold be something as simple as your clutch needing adjusted, or the gearbox could be in meltdown!!!. It is important to get these things checked out as soon as possible, the last thing you want is to have the dealer/Yamaha saying you should have brought it in sooner. Link to comment Share on other sites More sharing options...
Nino Raunchy Posted February 15, 2011 Share Posted February 15, 2011 Hi everyone, Had my WR125 X 2011 for about a week and a half now. got 400 miles on the clock so just over halfway through the running in period. BUT... last night I started having some trouble with my gearbox, specifiaclly when changing down after coasting to a stop at traffic lights. The shifter would move down but no gears would change. I also noticed that the gears do seem quite clunky. Any ideas? Cheers Sounds to me like, the gear selector spring has gone! Link to comment Share on other sites More sharing options...
jebb Posted February 16, 2011 Share Posted February 16, 2011 Hi everyone, Had my WR125 X 2011 for about a week and a half now. got 400 miles on the clock so just over halfway through the running in period. BUT... last night I started having some trouble with my gearbox, specifiaclly when changing down after coasting to a stop at traffic lights. The shifter would move down but no gears would change. I also noticed that the gears do seem quite clunky. Any ideas? Cheers If you are coasting to a stop and then trying to knock it down through the box(from say 5 th gear) when stationary it is bound to be a bit notchy/awkward. This is normal. You'd be better changing down into the right gear before stopping. Most gearboxes dont like this . If your worried take it back to the dealer as already advised. Link to comment Share on other sites More sharing options...
Recommended Posts