Squish Posted May 10, 2009 Author Share Posted May 10, 2009 A little update for you all. I have now got the spacer in was a little strange I just tried again and got it a little way in and then the hammer came out and tapped it the rest of the way. So a little more done over Friday and Saturday. Got the rear wheel adjusts in with plenty of copper grease and plastered the washers on the rear axle in copper grease and got the rear wheel in as well. Then just for some cheap glory I slapped the new sprcket onto the engine. Plenty of copper grease on this one too. So the next step was the Loom I had my dad doing some soldering on this beast as they had done a bodge job of taking the alarm out and I had some random wirers going no were and also one of the indicator wires had detached from the plug to the relay which might explain why my front right indicator didn't work when I bought the bike. Bought myself some Auto Glym Black Dye and sprayed up the rubbers which have come out quite nicely and fitted them, Followed by looking at lots of pics of the loom to work out were it sat and here is the end result. Just to polish it off I fitted the Ignition that I had got hold of I couldn't belive that they don't make sheer off bolts for these any more they are just normal screws seems silly to me but thats life. They do have stud locker on them though. Link to comment Share on other sites More sharing options...
THE HOG Posted October 22, 2009 Share Posted October 22, 2009 sweeet project m8. looking into gettin 1 myself to work on after i finish my tzr. good work. keep up the progress m8 Link to comment Share on other sites More sharing options...
Recommended Posts