Jump to content

pilninggas

Free
  • Posts

    1,312
  • Joined

  • Last visited

  • Days Won

    29

Posts posted by pilninggas

  1. im more keen on the direct approach

    you could just ask him nicely not rev so much so early in the morning :rolleyes:

    or if that fails,grab him by the balls with a suitably large set of grips and say SOFTLY, you fat bald bastard, if im woken up again by that heap of crap going up or down this road......

    this bit is very important.... you must twist on release of the for mentioned grips....

    that would work on me if a lady done and said that too me :blink:

    its a catch 22, if you talk to him and he doesnt listen to wat you say and carries on with his stupidity, then when you do something outside of the law, he is gonna know it is you and may well call the police in. All you need is a little evidence and bang your in a load of shit with the law.

    iv had this problem before and its almost better not to speak to people, as these chavs couldnt careless about other people.

  2. what do you mean by a diagram? the access nozzles for manifold vacuum are on the inlet manifolds, and the ajdustment screws are on the adjustable pivots that link the carbs.

    my mates divvy takes about 25 mins to balance start to finish. access is pretty good.

  3. i spoke to a copper before i sent my license off for a change of address, he said photocopy ur license and then he signed it for me with the date and his number. gave me peace of mind, though to be fair i didnt have a problem.

    the dvla are an utter disgrace, and their attitude to loss of entitlement is disgusting

  4. OK TRIED BOTH THE 'FINGER TWIRL AND THE DRILL CHUCK, CAN HEAR THE INNER WIRE TWIRLING IN THE CLOCK BUT NO MOVEMENT OF THE NEEDLE....................

    BEGINS TO LOOK LIKE A CLOCK PROBLEM THEN, DOES THAT MEAN RENEWING THE ONE CLOCK OR THE WHOLE LOT, IE SPEEDO, TACHO, AND FUEL AS ONE UNIT???

    NOT SURE ON THIS MODEL ...XJ600 1987..........IDEAS :angry:

    CHEERS KEITH

    DUDE DONT SHOUT!

    thats better, check this out:

    http://cgi.ebay.co.uk/YAMAHA-XJ600-CLOCK-A...id=p3286.c0.m14

  5. hi i put new spark plugs in but im not getting any sparks so i take that as an electric problem. some one at work surgested the cd unit do you recon this is a possability. one more question do you know what didital igniter is. thanks again for all your help.

    Igniter is the Cd unit on these bikes. How old are the coils? might be worth replacing those, having said that there tends to be lots of igniters on ebay (make sure it is the correct one).

    If you have a haynes manujal you can test the impedances of the coils, its not perfect but it can show up a dodgy coil from time-to-time.

    Check connections carefully as other electrical faults may mean the igniter does not output a LT voltage.

    good luk

  6. hi yea it turns over but wont start and yes its a fzr600 my mistake. theres no attempt to fire up then i end up making the battery going flat. its a 1991 model. it was working begining of last week then it wouldnt start in the morning now wont start at all.

    Did it run smoothly, before it stopped?

    my guesses is maybe worn main jets (makes the bike to rich to fire), try from cold with no choke to see if it starts.

    But probably dodgy 'lectrics! check plugs, coils and leads.

    good luck

  7. Hi Dan

    It seems to be running fine with the new jets and needles in..... :lol: .... untill the next problem comes up. The joys of riding a 19 year old bike. The bike is in almost showroom condition though. You have an R1, WOW very fast I bet, I think an R1 would be to fast for me, also my bottom would be eating my thong...... :lol: .....did I just say that.... :lol: ..... .

    Wimbldon, not been that far over. Fulham is the furthest I have been . Chat soon.

    Michelle.x

    :wub: lol

  8. hi every one i only just joined but i need help badly :angry: i have a yamaha yzf 600 genisis which was working fine till last week when it just wouldnt start. it ticks over but wont fire up. i checked the electrics all seem fine still wont start. i tried using jump leads and bumping it still nothing had the plugs out and cleaned them even that wont work.any help will much appreciated. thanks.

    Happy to help but -

    - what is a yzf 600 genisis? do you mean an FZR600 or a thundercat?

    - It ticks over but it won't fire. Do you mean it turns over but wont start? or do you mean it idles, but it wont take a blip of the throttle?

    Sorry to sound patronising, but further details would be useful!

    btw Welcome to this forum, i like it cos there is loads of variety! :rolleyes:

  9. i once did 300 miles on an RXS 100 in one day. Small bikes can be tiring in that sense, i do that sort of mileage on my FZR1000 without thinking about it.

    Should be easy enough, just unless it is vital, avoid motorways on a bike of that size if possible, as it is very tiresome riding a small bike on the m-way.

    Also at this time of year, be aware you may get very cold over timne and you may not notice it. Wear appropriate gear

    have fun 2

  10. things to start with (maybe):

    blocked breather (common on trailies)

    knackered spark plug (v. common on 2 strokes)

    Loose or corroded electrical connections.

    the DT experts on here may know better than me! (i havent had a 2 stroke for yonks!)

  11. Actually, upon reflection, would I be correct to suggest that the only difference is that the FZ1 Fazer ABS is a naked version and t'other FZ1 is a faired version?

    If so, excuse my erm, erm, duh! ;)

    Fazer is the faired one, FZ1 is the unfaired bike.

  12. T-hrottle P-ostion S-ensor.

    It is a sensor located on the shaft that opens the throttle butterflies in the carburetors. It tells the ecu indirectly what load is on the engine, so that the ECU can adjust the amount of spark advance. It will have 3 or 4 wires (via a socket), a refernce 12v or 5v, a 0v, either 1 signal wire or 2 signal wires. It is a potentiometer and will output signals (usually) that are a linear voltage that is directly proportional to angular displacement of the throttle butterfly shaft. In essence it tells the bike what your right hand is doing as you ride!

    You could check the contacts etc, and if you have the wiring diagrams see if it is getting +12v/5v (delet as appropriate) and whether is it giving a variable signal (of course check the 0v too).

    I'd be consulting a Haynes Comic myself for technical spec if you are unsure.

  13. each carb is seviceable with the carbs joined together, to do the jet job you do not need to separate the carbs. The carbs only tend to be a pain if you have to disconnect them from each other.

    if you are happy to do the job, get (buy, beg, borrow or steal) a set of carb balancers and do that while you are in there.

  14. thats a awful site. Dont use comparrison sites.

    They were qouting me £800 up for my hornet, i pay half that with my insurance company

    well for me, i am a bit older than you they were cheaper than any other online quote, £87 for fzr1000 aint bad.

    Ur too young!

  15. Hello Everyone! Im another Noobie! Just got a YZF R125 for my B-Day =] x Anyone have msn and wants to chat feel free to add me on msn.. [email protected]

    Anyone have any information on the best sounding and performance exhaust for the YZF R125?

    Thanks,

    Charlie

    welcome to the club!

  16. ha ha electric turbo things . you must of seen them on the net . there jus fans and they claim it adds 50bhp 2 a car . its bull shit , dont waste your money . a turo holds the air pressure and then releases it in a big blast . totally different from them things . there was a web site that bought 1 and tested it . if i can find it ill post it up . it goes into detail on where they are bull shitting.

    i don't think you will find that is the case. a turbo transfers kinetic energy from the exhaust to the intake charge, the problem with the electric cuperchargers is that on a car they need to flow hundreds (to thousands) of litres of air per minute, an electric supercharger on a 2.0 litre engine would draw hundreds of amps (indeed it takes many horse power to run a turbo charger or supercharger), so the type you see on the net don't worker (sightly noticeable gains (if any)are down to the MAF being fooled). A turbocharger becomes effective when the compressor wheel is able to displace more gas than the engine can scavenge through induction vacuum alone (Turbo lag is the period when the turbo is n ot flowing as much gas as the vacuum is drawing (i saw clarkson on top gear test an Evo and he moaned about turbo lag - what he was actually describing was a lack of low down power due to a low compression engine and retarded spark)). However on a small bike engine the charge flow is much lower and believe it or not i have heard of small-bike specific devices increasing power.

    Is the YZF125 fitted with an o2 sensor? thats where i would be looking for gains.

×
×
  • Create New...