[Tool question.]

Honestly "  once you"ve had a power ratchet , you just cant go back,  taking off manifolds  [ blind ]  just  hook socket on an press button,,,off in seconds  not minutes,,,   tightening up,  just release trigger as you hear /feel the resistance   ..

[Tool question.]

Impact wrench  , i have the 1/2  drive ,great tool ,   and a 3/8  small angle wrench ,

i never use a ratchet  now,, 

[Yamaha r3]

Save your cash batesy,   for what little gains.    move up to a 600,  OR THE THOU" 

[Yamaha YDS]

Hi,  the blue wire should go to a plate, beside sprocket, looke here ,https://www.cmsnl.com/yamaha-yds5-1967-usa_model8304/partslist/E-11.html#.XwdyzShKjb0

[XS250 exhaust]

Welcomen"   member jimmy  has a great affection for the XS 250.  maybe he can offer some  Advise  

[Hi Everyone]

Hi  phill,   hope it good riding weather with you,   as its pssing every day up north,,

[DT 125 MX carb slide sits too high...]

The  Stuttering,  .  drop the needle ,, [  ie  clip up a groove drops needle, ]

 

[DT 125 MX carb slide sits too high...]

Revs  hanging "  can be an air leak  .[ r/h  crank seal]   try closing the air mixture screw , half a turn  ,see what happens,

If your  cable is stock, then back off all the adjustment, [ at bars and  carb top ,]

 

[DT 125 MX carb slide sits too high...]

If you disconnect the cable " does the slide drop right down, ?   ,just to  isolate the cable,,  i have found aftermarket  cable are crap,   the white  cylindrical  piece  ,[ where 2 cables slip into, the slots aint deep enuff , i modified   one with hot knife , to allow cable to slip lower ,, 

[Old School CT1 175 Enduro owner]

Ha " its  Z900   A4    in zed 1B  colours,,    heavy pig,,  the h2  would slaughter it to 80mph,,

[Old School CT1 175 Enduro owner]

Hi bill" , great wee bikes , i had the DT175   new in 1976....had a Zed too   .

[Postage charges.]

iN   times like this , thers always those who will exploit ,,  there is no  Plaster up here,   and  online  vultures are wanting  20-50£  a bag..     normal price £7,,,, 

[YOC 2020]

Its all good up here soon ,,  i"d like that area,   never seen Hadrians wall,   

 

[Xvs 650 dragster. Jolty randomly goes into high revs.]

Funny how it was good after a clean,,  i would take carbs off ,and get them ultrasonic  cleaned ,,

[Hello]

Nice intro,,    i"v done thunder  in the glen,[ on  a 2stroke triple],  wheres you based ,,.

[Yamaha YZF600R Thundercat]

Hi  Tj "       

[YBR125 poor pick up]

An  old C90    would be my weapon of choice ,,as  most country"s   have parts,  and its DIY.    no   CDI    or  Circuitry   ,, 

[long way up]

Wow , good on you,    them Ybr"s are hardy wee bikes,  

[Us Import]

Air cooled Rd forum ,,   http://www.aircooledrdclub.com/smf/     ,,read the  section on dvla ,,etc ,, 

[Us Import]

oK,, You"l need a receipt from the seller, [ submit to the Nova  GUYS,]  TO PAY  IMPORT DUTIES,   then a dating cert [ if no title] 

[xt 125 rev sticking]

Hi there " iwould disconnect the throttle cable ,  start bike , lift slide manually [ rear with airbox connector  off ,   see if it settles and revs,,, to isolate cable , 

[1100 Dragstar whitewall tyres?]

Welcome in  Chris,,,, dont know about  tyres tho ..

[hello]

Hi there,    what country you from ,,

[New ybr 250 owner]

Welcome Dek" ,   i thot the ybr "s  were all 125"s  ,as the 250  class is defunked after 1981 ,  ? 

[stuttering engine]

Sounds fuel related.....or filters..