mad73

very nice m8 , hope u ride her the way she ment to be , safe riding thou.

hi there i think they would bolt straight on but not sure, i have some fzr 600 calipers think they the same pm me your e mail and il take a pic and send to u so u can see if they the same . mick

good luck m8 , i found the test easy and i took mine somewhere i didnt no, as others said just listen to wot u being told and dont worry and keep a cool head and il think u will piss it,,,,,,,,,, good luck again.

ok all ,,,,,,,, fixed all that need fixing from failed mot sprayed the lowers and all fitted so nearly there just need to mot and tax now and i can use will need to do a few bits , r1 undertray change leavers and mirrors and it will prob continune on after that.............................

hi m8 google heaths fzr it will tell u how to fit a thundercat tank ( easy ) and tell u how to fit the r6 seat unit i have done this to mine but used a r1 seat unit wasnt to hard . check out the gallery and your find mine.............................. if u need help just e mail me,

will send soom pics ,, the only other swinger that might go in is the braced fzr 400 i might look into it my self for the thundercat.............................

pm me your e mail and il send u some pics of wot can be done to the yzf body wise as i got loads of pics. thats if u want to. mick

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...E:IT&ih=014 i have also got a r6 swinger for sale it has the same bearings as the yzf750 so i would see why that woulnt fit think they the same width could messure, the r6 swinger is longer so would help it not to wheelie with the 1000 engine.

hi there i wouldnt think it would fit the frame with out any mods , i have a thundercat project that im doing and i just tried to put a yzf swinger in and its to wide and the fzr 600r frame looks the same as the thundercat i could b wrong but if u want a swinger ive got 1 on ebay starting price 9.99.

hi there i got a yzf swinger if u need good condition and a few other odds and ends £60 the lot , i bought from some guy off here for my thundercat project but it aint gona fit, let us no if u want or it will end up on e bay,,,,,,,,,,

hi m8 the r1 seat unit is def not a straight swap with the fzr as i have done it ( look in the gallery ), to change your seat unit it would not b to hard just find wot u like and u have to make it fit , prob have to cut some of the sub frame away sound hard but not to bad , if your not good with the spanners i would try if u get wont i mean. good luck in finding or doing this , try looking at single yzf 750 seat unit that would prob look ok on the fz,,,,,,,,,,,,,,

hi m8 i use castrol active evo about 25 quid for 4 ltr never had a prob,,,,,,,,,,,,,,,,,,,,

chees for your replys it is a haynes manual im looking in ,,, wot i want to do is put thundercat swinger bearings in a r6 swinger as they the same size but the pivit bolt on the thundercat is smaller ,,,,,,,,,,, or does any 1 no where i can get the swinger made to fit,,,,,,,,,,,,,,,,,,,

no probs m8 i have std settings as well if u need to change back,,,,,,,,,,,,,,,,,,

my manual says take to a yamaha dealer any other help,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ok found the book so here we go. rear shock pre load 16.5 mm thread between top of locking ring and under side of shock top, rebound 7 clicks out from full in,,compression 5 clicks out froks preload 2 and half lines showing (8mm)from top of preload nut to the top of fork cap rebound 2 clicks out from full in compression 3 clicks out hope this helps but i would think that it would all go on your wait ,, i had these settings on my yzf and it was much better and im about 11 and half stone ............................

help please i need to remove my swingarm bearings does any 1 no how to do this

i have that book some where if i find il let u no ,,,,,,,,,,,,,,

hi there i found a site the other day cant remember wot its called but google the name of the exhaust and your find it ,, think they were about 550 for the r6,,,,,,,,,,,,,,,,,,,, really nice thou,,,,,,,,,,

take the exhaust off look in the front pipe to see if its rejuced in size if it is get it out , this will make a big difference ( well should ) then try the carb look to see if that is rejuced in any way ( ie inlet and out let ) try a power filter s&b some thing like that they sell them on m&p site u might need to rejet the carb awell sounds a lot of work but not to bad , if u do this and have trouble pm me and il try and help if i can. mick

very nice ,, i used to have 1 was gutted when i sold it ,,,,,,,,,,

i have a photobucket account ive put pics on b4 just wont have it ,,, il try again. cheers for the reply

tried again with the pics but its saying you have entered a link to a website that the administrator does not allow links to

i no its not a yam but i really need help, this is my sons first bike its an italjet motorcross , i need help with what model this is and where i can get spares the guy i bought it from didnt no so can any 1 on here help , any help will be greatful i have tried to put pics on but it anit letting me so if u no anything about these bike or need to see the pics pm me your e mail and il send u the pics. thanks