New Members Welcome Area

hi everyone im 19 and recently done my part 2 so i can get of l plates lol and ive got myself a yamaha tw125 so if your a fellow tw owner id love to c wat youve done to yours and wat you think of them many thanks luke p.s how do i upkoad pictures ?

Hi everyone, though I would join up on here. I currently ride a FZR1000 exup ru 1992 love it! I am sad to say I also own a '02 bmw f650gs (dont worry it will be going up for sale soon!) I am going to be getting another bike soon thinking fj1200 to use while I turbo my FZR (yes yes yes i know bla bla bla loads of negitive comments etc. etc. etc.) Any way off to post in other sections now :-) have a nice day! and merry christmas!

hi everyone apologies for not coming ti the welcome section first. my first bike was a honda h100s that i used to tinker with untill i got my car. after many years anf 5 kids later my mini mid life crisis has started. ive just done my cbt and got a yamaha jog r ( hair dryer) to get some bike experience.

hi i have come back to biking again i have got xj6 f abs 2010

Hello everybody, Im Kim from hertfordshire, I've not long bought a Ybr 125, seems a nice little bike. Other than the issues im sorting out. I have a full bike licence, I did it when i was 20 just before they changed the rules, I just need to wait my last couple months before its derestriced. Not long now ! I'm a mechanical engineer, and have spent a few years racing and riding motocross but having a little break now. Nice to meet you all Kim

Hi people i am a new user to this forum and i am looking for some help with my 2002 dtr 125 ? As i have never had one of these bikes before Cheers from liam

New member here with a 2008 YBR 125 - Mainly here as a DIY mechanic looking for help advice and to offer the same. Hopefully doing my full test this spring and then will be getting something bigger!

Hi there, my name is gav I have an xvs650 classic. I've run into trouble with it, namely I sent the carbs to our ultrasonic tank at work and they've been misplaced. I can't kick off about it because it was a side job. I bought a spares or repairs set as I have all the internals from the old ones.. But, where the needle comes through to the underside of the carb there is a brass insert missing. My question is do any other carbs fit say from a virago as finding another set is proving very difficult. Or does anyone have any for sale? Thanks in advance for any help Gav

Hi my name is barry and im just in the process of building a 1988 dtr125 barn find so im sure i will be asking lots of questions as im a complete novice thanks

I recently picked up a 650 Dragstar and decided to bobber it and whilst looking for answers on the internet many of my questions bought me to here so I thought it only fair to sign up with a paid membership. I've been riding since the 80's but in the last 20 years or so I've only really ever kept a bike for less than a year as I could not get it through the side doors into my back garden and I didn't just want to leave it on the drive. Anyway my wife decided she wanted to start riding last year so she passed her CBT and got herself a YBR125. She's a bit of a rock chick so I bought her a Dragstar 125 for Christmas and after looking at it on the drive for a few weeks I…

Hello, obviously I'm new to this forum after adding a 97 Thunderace to my bike shed along side a 96 CBR900 and a 2001 ZX7R. I will defo need your help along the way but I will persist for a while and see what I can do. I spend more time tinkering than riding so all 3 have relatively low miles on them. I live just outside Rochdale so great to ride over the Pennines. Hope everyone is coping ok with the current climate, take it easy !

Hi everyone, Its my first day in the club. I’ve posted a request for help in the custom forum. I hope someone can help. Phil

Hey folks, my name's ditchkid and I'm new here. I've come to join the party because I just got my second Yamaha bike and I've already found a lot of very valuable advice on this forum and figured it was time to make it official. I currently have a '97 DragStar 650 which is pretty heavily customised, kind of an old school chopper, and a relatively new acquisition which is an '83 TT600 with most of the original bits still on it! But not all, most notably the tank, and good lord they seem rare! I found one on German fleabay and its on it's way, so fingers crossed. I've currently got a random tank and seat on it just for bombing around the lanes but it'll be going …

:hail:Hi yall - B I G 'SHOUT OUT' TO ALL BIKERS & FRIENDS - from sunny Nth Yorks - Pickering (UK) actually where pies & beer come from..!! ( OOps - Not forgetting my mate Paul's Eastgate chip shop for the VERY BESTEST FISH n CHIPS in PICKERING..) Until last week been an oil head for 3yrs but always fancied Yam' Dragstar for some time since my Pan days 12 yrs back.. Anyway - just swapped my R1150RT for Dragstar 1100 Custom - both '04 machines.. & so far D E L I G H T E D. . .! ! Bike in great order with only 6k mls, but need to get into her if you pardon the expression..!! (No offence to anyone.. ) Completely different to beema a…

Obviously new to the Forum - mainly for help - if I'm honest. I've recently bought an XJ 600 (pre-diversion) as a non runner. It had been standing for 4 years and looked as though it needed a bit of loving and care to get it back on the road again. The poor thing :(. It's my project for the Summer. However, I'm offering (free of charge - you pay the postage or pick up personally) the rear pannier brackets (both sides) off this bike. Please email me - if allowed - and I'll send you a few photo's of condition etc.

Hello to everybody I have a 1987 Yamaha dt 125 r I can't seem to find the engine numbers or frame numbers I could be looking in the wrong place.if anyone knows that would be brilliant.

Hi there ,m thought I would join up as I have just bought a FZR600 foxeye as a project , just ripped it down m took loads of notes and pictures

By the looks of things its a fab site for info, help and interesting discussion. Ive already posted an article for u guys n gals as my Yam R1 has lost all compression on cylinder number 3 n was wanting info.. So if u can help plz read Thanx

hi to everyone im ian, i am currently restoring a rs200 any advice would be welcomed, in desperate need of a single seat and rack if anyone knows where i could source one.

hi everyone