.jpg.5c05eb7af257e741ca000bd984024429.jpg)
Everything posted by drewpy
-
Don't you just hate it when this happens
I'm still finding stuff I "put away" for other projects and well as buying two of everything. no wonder I'm skint
- Anyone selling Edit
-
What`s wrong in this pic?
probably the kick stand
-
xj6 rear wheel, unknown clip!?!
if you want the wheel to move forward loosen the axle bolt and the adjusters and give the wheel a kick from the rear pushing it forward.adjusters only work pulling the wheel back (and when the axle bolt is loose)
-
Thundersprint 2014.
I can't ride till end may at least, really really pissing me off
-
xj6 rear wheel, unknown clip!?!
that looks like a brake pad shim. usually fits between the caliper and back of brake pad
-
CLASSIC RACING at Three Sisters circuit May 10th and 11th
May 10th and 11th There’s CLASSIC RACING at Three Sisters circuit, organised by BHR, part of the VMCC. Features a wide range of vintage and classic bikes competing in classes from pre-1934 solos, outfits and three-wheelers, through to the big BEARS of the 1970s and 80s. Spectators and new entrants welcome; also the opportunity to ride in non-competitive parades at many tracks. 07400 508055 / www.britishhistoricracing.co.uk
-
1996 TDM 850 rear shock
a picture would help eddie. shared the same stuff as the fz I think too. if you go on cmsnl and get the part codes, you can then google it and you might find they share parts with other bikes.
-
Adjusting ride height on xj600 pre diversion
whats an all weather biker treatment, rust? if its already done, does that mean you want it lower still?
-
xj600 pre diversion rev counter AND right hand indicator failing
grey wire from ignitor sends the pulses to the rev counter as well as the coil. check connections and that earth and power are reaching it too
-
Ultimate Muscle Roller Legend
my daughter knew exactly what was going on, who they were and the tune. must be out of touch with the young 'uns now
-
Hi from Italy
welcome back Giorgio. glad you are ok now. bike is looking good
-
1965 YA-6 125cc project
can you soak the whole thing in diesel for a few weeks? the oil can get into places and then you slide hammer it off or go for more kinetic/heat methods
- Apologies (in advance)
-
XT500 polishing a turd
schweet ride
-
Rd r r - the tale of 3 RD400's - More of a saga than a project.
I buy NOS parts and forget I have them its ok so long as you don't buy it again! that shed is looking good there
-
Oil Light
it doesn't say OIL it says LOL
-
Ultimate Muscle Roller Legend
Deep in the forest lived Billy and his charming companions. They peacefully honed their bodies and listened to music there. But a wave of development came upon the forests. One who would turn all to road. Kagamine Rin had come. Billy must stop the construction before all is turned to road had to post it again for education purposes
-
BSB Oulton Park.
funny day, Hopkins was rubbish and refused to come into the hospitality tent which left it to Josh Waters and Nial Mac to do the talking. still managed to get a pikky with them and got photobombed and drank plenty of this
-
BSB Oulton Park.
and you'd turn down a £35 ticket with hospitality?
-
Oil Light
don't overfill grouch or you'll blow the case gaskets/seals is it an oil pressure light? engine still quiet? my fz has an oil level light and the xs has an oil pressure light. if its the pressure, take it back to the dealer before its terminal.
-
FZR600R crankcase knackered
but you can replace a crankcase?
-
BSB Oulton Park.
I'm going tomorrow with Mike as we have free tickets. prob hobnobbing in the Tyco S#%^ki tent.
-
FZR600R crankcase knackered
might be easier/cheaper to replace the engine TBH
-
Managed to have my first ride out !
so mad that I can't ride yet. missing loads out