hazard Posted February 12, 2007 Share Posted February 12, 2007 much as i love my rsx the 6 volt system is getting on my wick. does anyone know is it possible to upgrade to a 12 volt system? it would be nice to have the indicators flash at idle for a change!!!!. Link to comment Share on other sites More sharing options...
yamyam thank you maam Posted March 20, 2007 Share Posted March 20, 2007 i think a tzr125 generator will fit the rxs and change it to a twelve volt or just keep the 6v and put lesser wattage 6v bulbs in they wont be brighter but the electrics should work a bit better as ther is lees demand in the jenny Link to comment Share on other sites More sharing options...
yamyam thank you maam Posted March 20, 2007 Share Posted March 20, 2007 flasher relays sometimes gum up a bit open it up and spray some wd40 in them Link to comment Share on other sites More sharing options...
yr vic Posted June 20, 2007 Share Posted June 20, 2007 flasher relays sometimes gum up a bit open it up and spray some wd40 in them the output from your generator is more than twenty volts I know that you might think it would be less but the voltage is governed by a regulator and converted to 6v D C (thats what your battery needs) by a Rectifier if you change the regulator rectifier for one rated at 12 volts thats what you will get. you will need a 12v bat bulbs all round, coil, flasher unit all made for 12v ......... the usual problem with old bikes is bad connections bad earths and a battery that looks like a fossil. Link to comment Share on other sites More sharing options...
Recommended Posts