dunraffin Posted November 19, 2013 Share Posted November 19, 2013 Hi, I bought this 535 virago as a winter project, it had been fired by some person so a lot of the bike had been cooked. This included the loom, I have since been able to purchase another one which I have fitted but have come across a few wiring problems.This is where I need help, I have one green block with Bl/y-b/y at the front with no corresponding attachment. plus a white block 2xbl with the same problem gets better 1xtorpedo with 2 brown,1 with black, 1 with green wires cannot seem to find what goes where ? can any one help please. Link to comment Share on other sites More sharing options...
blackhat250 Posted November 19, 2013 Share Posted November 19, 2013 Welcome dunraffin " plenty vyrago fans in here, also the draggy boy will rip into you,,, hav fun,,, and they"l be Dunlaffin Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted November 19, 2013 Moderator Share Posted November 19, 2013 Moved to customs section. Link to comment Share on other sites More sharing options...
Noise Posted November 19, 2013 Share Posted November 19, 2013 Got any pics of the problem wires? Have you plugged the wires in that come off the engine? I know the dragster has 3 wires coming out of the left hand side that plugs into the loom. O and yes I'm that drag queen guy that rips into retardgos ha ha. Link to comment Share on other sites More sharing options...
dunraffin Posted November 20, 2013 Author Share Posted November 20, 2013 Yes all wires on left hand side are connected these wires are at the front of the bike. One being the front brake switch or clutch switch could be either. Link to comment Share on other sites More sharing options...
Noise Posted November 20, 2013 Share Posted November 20, 2013 Stupid question but they need to be asked some times, bit did you buy the same year loom as the year of your bike? soem years may have more / different wires than other years. Link to comment Share on other sites More sharing options...
neversaydie Posted November 20, 2013 Share Posted November 20, 2013 Whats not working then? Link to comment Share on other sites More sharing options...
jimmy Posted November 21, 2013 Share Posted November 21, 2013 As Noise says, put up some pics of the wires and the location, the front of the bike is a bit vague. If the pics are up I can have a look at my boys 535 for a comparison Link to comment Share on other sites More sharing options...
dunraffin Posted November 22, 2013 Author Share Posted November 22, 2013 Ah thanks will take some and stick em on here ASAP Link to comment Share on other sites More sharing options...
dunraffin Posted November 22, 2013 Author Share Posted November 22, 2013 Right, I have a green/yellow,brown from the switch for the brake which has a block on the end.( no male connector in the loom). I also have 2 brown wires in 1 torpedo (no connection.and lastly I have a red/black and yellow/black wires going to a male block connector with no female connection . Also on my wiring schematics clutch is b/bl and the brake is y/g-br Link to comment Share on other sites More sharing options...
Noise Posted November 23, 2013 Share Posted November 23, 2013 Right lets start to narrow things down. These wires are at the front of the bike yes? (looks like it in the pics as i can see the bottom yoke) Have you plugged in the speedo? if not i *THINK* the square blocks are for the that. As for the torpido connectors they almost look like the ones for the indicators that are hidden in the head light. Are these in the same part of the loom as the head light plug? Link to comment Share on other sites More sharing options...
dunraffin Posted November 23, 2013 Author Share Posted November 23, 2013 I have connected the speedo cable up yes, the two brown wires are in the same area as the headlight. Link to comment Share on other sites More sharing options...
Noise Posted November 23, 2013 Share Posted November 23, 2013 Speedo cable as in.the bit connecting it to the wheel, or the cable that makes all its lights Work? Have you plugged the front indicators in? Link to comment Share on other sites More sharing options...
gizmo666 Posted November 23, 2013 Share Posted November 23, 2013 the two brown wires are the indicators Link to comment Share on other sites More sharing options...
dunraffin Posted November 25, 2013 Author Share Posted November 25, 2013 Do they connect to a black wire.? I have this memory of this being the case . Link to comment Share on other sites More sharing options...
Recommended Posts