hawichaway Posted April 17, 2013 Share Posted April 17, 2013 getting spark with the electric start but when kicked over i got nothing. any suggestions? the armature looks a bit gunked up so i was gonna try to clean that but i cant seem to figure out how to get the bolt out of the end of the shaft to access it. hopefully the armature isnt screwed all together cause from other posts ive gathered that it seems to be a pain to remove and if necessary acquire a new one. Link to comment Share on other sites More sharing options...
Moderator Cynic Posted April 17, 2013 Moderator Share Posted April 17, 2013 GET A BIKE MANUAL. Then read it. Just ripping into it without knowledge will be the death of the bike and your enthusiasm. If it sparks on the electric use that to get her to run initially. Those leccy starts are complex and expensive dont fuck with it if your not sure. Link to comment Share on other sites More sharing options...
Moderator mervin Posted April 17, 2013 Moderator Share Posted April 17, 2013 here is CS3 manual bascially the same i reckon http://www.fileswap.com/dl/9cCHwDGm/Manual_CS3B.pdf.html Link to comment Share on other sites More sharing options...
Moderator DirtyDT Posted April 17, 2013 Moderator Share Posted April 17, 2013 The kick will just operate the same parts of the bike as the electric starter, Just slower so I am surprised that there is only a spark on one method. Have a look at the YA project thread for some help Link to comment Share on other sites More sharing options...
Recommended Posts