please,

I want to check the valve clearance on my 2007 ybr 125.

Manual says to replace the O rings, 2x valve clearance caps, 1x crankshaft end cap and 1x timing inspection cap.

Only place I can find is AJ Sutton, the 4 rings cost about 7 quid but when they add p+p (to N.I.), = 23 quid

Anyone know where I can get 'em and without the astronomical p+p???

Do you have part numbers?

93210-44889-00 cylinder

93210-14899-00 timing inspection cap

93210-328A4-00 crankshaft end cap

have you tried your local yam dealer

or if you have the sizes www.simplybearings.co.uk

Try http://www.oemmotorparts.com

It seems these parts are shared with TT-R125's and TT-R's 50

have you tried your local yam dealer

or if you have the sizes www.simplybearings.co.uk

No Mervin, I don't know the sizes.

I'll call the Yam dealer tomorrow.

Thanks for the link, I'll be bearing it in mind, lol.

Try http://www.oemmotorparts.com

It seems these parts are shared with TT-R125's and TT-R's 50

No TT R 125 or TT R 50 listed, YBR125 is listed but it's a blank page.

Thanks DirtyDT, I'll email them if Yam dealer fails.

Just a side note you don't have to replace them if they don't rip.I have reused them without leaks on many bikes over and over again.

I agree with DT50 above.

Type your numbers into the top parts box here to see ther models that may help

Just a side note you don't have to replace them if they don't rip.I have reused them without leaks on many bikes over and over again.

Nice one dt502001!

Greased rings and re-used...... Job done.

Thanks everyone.

Always glad to help