paulrever Posted October 14, 2012 Posted October 14, 2012 please, I want to check the valve clearance on my 2007 ybr 125. Manual says to replace the O rings, 2x valve clearance caps, 1x crankshaft end cap and 1x timing inspection cap. Only place I can find is AJ Sutton, the 4 rings cost about 7 quid but when they add p+p (to N.I.), = 23 quid Anyone know where I can get 'em and without the astronomical p+p???
Moderator DirtyDT Posted October 14, 2012 Moderator Posted October 14, 2012 Do you have part numbers?
paulrever Posted October 14, 2012 Author Posted October 14, 2012 93210-44889-00 cylinder 93210-14899-00 timing inspection cap 93210-328A4-00 crankshaft end cap
Moderator mervin Posted October 14, 2012 Moderator Posted October 14, 2012 have you tried your local yam dealer or if you have the sizes www.simplybearings.co.uk
Moderator DirtyDT Posted October 14, 2012 Moderator Posted October 14, 2012 Try http://www.oemmotorparts.com It seems these parts are shared with TT-R125's and TT-R's 50
paulrever Posted October 14, 2012 Author Posted October 14, 2012 have you tried your local yam dealer or if you have the sizes www.simplybearings.co.uk No Mervin, I don't know the sizes. I'll call the Yam dealer tomorrow. Thanks for the link, I'll be bearing it in mind, lol.
paulrever Posted October 14, 2012 Author Posted October 14, 2012 Try http://www.oemmotorparts.com It seems these parts are shared with TT-R125's and TT-R's 50 No TT R 125 or TT R 50 listed, YBR125 is listed but it's a blank page. Thanks DirtyDT, I'll email them if Yam dealer fails.
dt502001 Posted October 14, 2012 Posted October 14, 2012 Just a side note you don't have to replace them if they don't rip.I have reused them without leaks on many bikes over and over again.
Moderator DirtyDT Posted October 14, 2012 Moderator Posted October 14, 2012 I agree with DT50 above. Type your numbers into the top parts box here to see ther models that may help
paulrever Posted October 16, 2012 Author Posted October 16, 2012 Just a side note you don't have to replace them if they don't rip.I have reused them without leaks on many bikes over and over again. Nice one dt502001! Greased rings and re-used...... Job done. Thanks everyone.
Recommended Posts