Grouch Posted August 26, 2012 Posted August 26, 2012 I keep my bike outside under a cover. Even though it is getting covered it is still getting wet with damp and condensation. I plan on getting one of those metal sheds, providing my landlord allows it! But in in the mean time is there a spray or something I can apply to my bike to stop it from rusting?
Moderator DirtyDT Posted August 26, 2012 Moderator Posted August 26, 2012 Yes. I like GT85 others like ACF50.
Moderator DirtyDT Posted August 26, 2012 Moderator Posted August 26, 2012 Nope. I spray the SV every winter as I use it when the salt is down.
Grouch Posted August 26, 2012 Author Posted August 26, 2012 Thanks DT I'm going to look on eBay now for some cheap ACF50.
Moderator DirtyDT Posted August 26, 2012 Moderator Posted August 26, 2012 I has a good reputation but I use the other brand. You can get semi permanent/rigid covers LINKY
Grouch Posted August 26, 2012 Author Posted August 26, 2012 So the GT85 is the better choice? I use two quality covers for my bike and it still get's damp and wet. I'm going to get a metal shed and put a concrete base down. I plan on getting a second bike so I need a shed/garage. I'll be able to keep all my oil, sprays, jerry can, etc in there.
NE0 Posted August 26, 2012 Posted August 26, 2012 I used Q20 last winter and although expensive, I think it was the dogs dangly bits! I know I've posted this before but just check out this sales video!!!....... although don't try it at home!
Grouch Posted August 26, 2012 Author Posted August 26, 2012 Wow Neo, that is mental. That must be some good shit to do that. When I do buy some protection spray for my bike, how do I apply it, do I just blather the whole of my bike in it, and how often should I apply it?
Moderator mervin Posted August 26, 2012 Moderator Posted August 26, 2012 I use ACF 50 , it runs off like water, be mean with it spray a little on and spread it with a brush. you wil only find it on the floor 10 minutes later otherwise, for tricky bits like around brakes etc spray a little into the lid and use a 3/4" brush to apply it
Moderator DirtyDT Posted August 27, 2012 Moderator Posted August 27, 2012 Keep way from the brakes with any of them. I do the same as Merv with the GT85, spray some on and then rub over with a rag. I spray the engine too and it smell great as it burns off. As an aside, you will get condensation issues with a metal shed. condensed water will drip from the roof.
Grouch Posted August 27, 2012 Author Posted August 27, 2012 I was thinking of putting a dehumidifier in there.
Moderator Airhead Posted August 27, 2012 Moderator Posted August 27, 2012 I would be concerned about getting condensation inside my cover...how come? are there no vents? no airgap underneath? you should think about treating the cause...not the symptom
neversaydie Posted August 27, 2012 Posted August 27, 2012 I used ACF50 last winter. Dont get it on the brakes, and remember that it has a tendency to "creep". The small sprayer that came with it was crap, better off with brushes and rag, apply sparingly. Road muck tends to stick to it but it does wash off
Grouch Posted August 27, 2012 Author Posted August 27, 2012 I would be concerned about getting condensation inside my cover...how come? are there no vents? no airgap underneath? you should think about treating the cause...not the symptom The cover does have air vents and a gap underneath to allow air to circulate, but this just isn't enough. When I take the cover off there is a layer of condensation and even patches of water on the bike. What would you suggest I do?
Grouch Posted August 27, 2012 Author Posted August 27, 2012 I used ACF50 last winter. Dont get it on the brakes, and remember that it has a tendency to "creep". The small sprayer that came with it was crap, better off with brushes and rag, apply sparingly. Road muck tends to stick to it but it does wash off Thanks, I am going to use a brush, I have already learnt my lesson when it comes to brakes and WD40 type products. I will be extra careful when applying to areas near the barking systems.
Moderator Airhead Posted August 27, 2012 Moderator Posted August 27, 2012 I dont have condensation under my cover at work, its only a cheap nylon thing...I would try another cover rather than accept my bike would be always wet under it
Grouch Posted August 27, 2012 Author Posted August 27, 2012 Thinking about it, it has done nothing but rain all summer in the city I live, and I mean heavy rain. I don't think the covers are designed for prolonged heavy downpours. It has rained nearly every single day. The only thing I could do is to buy a very thick cover, but I imagine for a quality one these will cost a lot of money, which I suppose will be worth it.
Recommended Posts