Tommy10bikes Posted January 22, 2011 Posted January 22, 2011 After restoring the bike for 4 months its finished, its motd and insured so i can now get it registered. Its been a good resto which i have enjoyed,fairly easy but most of the bits have to come from the states. I have done all the polishing and wheel rebuilding, rebuilt the motor and re-sheathed the controls. Soon to enjoy this summer Next resto is my DT360 Cheers TTB
Moderator mervin Posted January 22, 2011 Moderator Posted January 22, 2011 Sweet man , I like that a good job done there
Moderator Airhead Posted January 22, 2011 Moderator Posted January 22, 2011 Superb job Tommy, looks like a new one but in reality it is no doubt better than new
Moderator drewpy Posted January 22, 2011 Moderator Posted January 22, 2011 rock on tommy, good resto there mate
2 Wheels Posted January 22, 2011 Posted January 22, 2011 Very well done there Tommy, Ya should of taken pic's at the start and let us follow it stage by stage on here.
Tommy10bikes Posted January 22, 2011 Author Posted January 22, 2011 Here is how it started, all there and solid with very little rust. Hope you enjoy the pictures TTB 1
2 Wheels Posted January 22, 2011 Posted January 22, 2011 Now thats what im talkin about,,,,,,,,fair play to ya !
Moderator Airhead Posted January 22, 2011 Moderator Posted January 22, 2011 Superb, its a fantastic job. wasnt bad to start with though. Did you replace with much NOS, did you re-zinc / chrome anything?
Tommy10bikes Posted January 23, 2011 Author Posted January 23, 2011 Superb, its a fantastic job. wasnt bad to start with though. Did you replace with much NOS, did you re-zinc / chrome anything? Hi OGOAB I had all the zinc plating redone and nearly all the chrome work redone as well, new cable where bought from the states but they where pattern parts, very good copies though, new shock but pattern rechromed indicators, new tyres and tubes.Tyres where a problem as the front is an obsolete size so i had to go for a 300 x 19 rather than trying to find a 3.25 x 19. Answer to your question the paint inside the rim is Hammerite No1 rust beater. Cheers TTB
nets Posted January 23, 2011 Posted January 23, 2011 Lovin it but then I would say that I've had a new seat foam and cover since this picci was taken so it don't look quite so squashed(the original was full of Michigan mouse home!!) how it looked before all good fun don't ya think?
Tommy10bikes Posted January 23, 2011 Author Posted January 23, 2011 Fully agree Nets, cracking bike both of them. I have another DT1 a 69 model but no lights and a 21" front wheel which i think i may turn into a MX version. Looks like yours would have been much harder project to restore than mine, so well done there. Got to admit it was your bike and article in the mag that got me looking for the early DT, trouble is i cant find the copy of the magazine now. I wonder how many DT1 there are in the UK. TTB
blackhat250 Posted January 23, 2011 Posted January 23, 2011 Cracking job tommo" , i"v always liked the DT1 / 2 & RT1. they have a better crackle off the exhaust than the later DT250/400, Muted over engine exhaust, got any picks of the 360 ? And linconshire aint far from Squires, so maybe a big Yamaha trail bike turnout this year eh
Tommy10bikes Posted January 23, 2011 Author Posted January 23, 2011 Cracking job tommo" , i"v always liked the DT1 / 2 & RT1. they have a better crackle off the exhaust than the later DT250/400, Muted over engine exhaust, got any picks of the 360 ? And linconshire aint far from Squires, so maybe a big Yamaha trail bike turnout this year eh Squires , well you never know but i would have to come on the XT500 , any way here is the DT360 before stripdown. Here it is at the moment, frame just come back from powder coating, fork stantions are at philpots as they where really bad, zinc plating has come back so all i have to do now is send the tinware off for painting and send the parts off for chrome plating. Here is a utube link on the day i managed to get it up and running http://www.youtube.com/user/markcoppersmith#p/a/u/1/hJORwlNXSQE Yes it does go well. TTB
nets Posted January 24, 2011 Posted January 24, 2011 Squires , well you never know but i would have to come on the XT500 , any way here is the DT360 before stripdown. Here it is at the moment, frame just come back from powder coating, fork stantions are at philpots as they where really bad, zinc plating has come back so all i have to do now is send the tinware off for painting and send the parts off for chrome plating. Here is a utube link on the day i managed to get it up and running http://www.youtube.com/user/markcoppersmith#p/a/u/1/hJORwlNXSQE Yes it does go well. TTB My TRX is at a similar stage at the mo was only supposed to be getting a bit of winter tlc but is now in a million pieces it will be better than new when finished and should be ready for summer....if I get cracking.
Tommy10bikes Posted January 24, 2011 Author Posted January 24, 2011 My TRX is at a similar stage at the mo was only supposed to be getting a bit of winter tlc but is now in a million pieces it will be better than new when finished and should be ready for summer....if I get cracking. Yes Nets it will be on us quicker than we think, Arhh summer months riding down country lanes, i can see it now, how wonderful our hobbies are, good job everybody dosnt want to do it. TTB
Alexcuba Posted August 8, 2013 Posted August 8, 2013 Wooo!!. Nice jobb!. I have a At2 1972 in pieces so I'd like to restor but I have not idea how to make it!. Could you suggest me some literature wich can help me know where each piece goes?
Tommy10bikes Posted August 8, 2013 Author Posted August 8, 2013 Wooo!!. Nice jobb!. I have a At2 1972 in pieces so I'd like to restor but I have not idea how to make it!. Could you suggest me some literature wich can help me know where each piece goes? You need a parts catalogue and this link should help. http://www.ytcn.nl/archief/Archief/Yamaha%20Parts%20Manuals%20ALL%201950-1996/AT/AT2_CT2_AT3_CT3.PDF TTB
obriens65 Posted August 8, 2013 Posted August 8, 2013 Nice looking bike. Bet you can't wait to get out on it and show off all your hard work.
dt502001 Posted August 8, 2013 Posted August 8, 2013 I'm jellouse,I'v been looking for a older bike to restor for a couple of years now and can't find squat around here. Nice job TTB,just wondering how much you spent redoing that bike?
Recommended Posts