Skidz Posted June 21, 2009 Share Posted June 21, 2009 Hi After a long delay I'm finally getting my bike back together though I've hit a snag, I ordered a bearing set from Wemoto which consisted of two bearings for the front wheel and and two for the back wheel with another for the sprocket carrier. The Haynes manual says that the FZR should have 2 bearings side by side on the RHS and one on the LHS making three. If this is right the bearings will not fit. I can't remember if this is right as it was a long time aga that I removed them for powder coating. If anyone can shed any light I would be grateful. Link to comment Share on other sites More sharing options...
Recommended Posts