anthjanet Posted April 21, 2009 Share Posted April 21, 2009 im after a bit help. i need the valve clearance settings for my yamaha sr 125. It starts and runs fine but its quite tappety. if anybody can give me settings for inlet and exhaust valve,it would be great. Link to comment Share on other sites More sharing options...
YPVS TONE Posted April 22, 2009 Share Posted April 22, 2009 The valve clearances are Inlet 0.05 - 0.09mm or 2 to 4 thou and Exhaust 0.11 - 0.15mm or 4 to 6 thou with the engine at TDC on the compression stroke with the engine cold. Tony. Link to comment Share on other sites More sharing options...
anthjanet Posted April 23, 2009 Author Share Posted April 23, 2009 The valve clearances are Inlet 0.05 - 0.09mm or 2 to 4 thou and Exhaust 0.11 - 0.15mm or 4 to 6 thou with the engine at TDC on the compression stroke with the engine cold. Tony. thanks for the infomation. ill set them on saturday morning and try it. thanks again Anth. Link to comment Share on other sites More sharing options...
Recommended Posts