Jump to content

adyr81

Free
  • Posts

    3
  • Joined

  • Last visited

Previous Fields

  • Current Bike(s)
    Yamaha RZR 250 - sold, Yamaha FZR 400 Genesis - sold,Yamaha xt 125 x 08 - current bike

Profile Information

  • Gender
    Male
  • Location
    Grimsby

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

adyr81's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. so my indicators where working ok. i installed a alarm just the basic functions live and ground, there is two yellow wires that connect to live on the indicators to flash them when alarm is activated, front indicators are working fine when i use turn switch but back ones have stopped working. the bulbs are ok i disconnected the yellow wires i connected to see if that was the issue, but that isn't the problem. i read that rear indicators have a separate ground on most bikes, as the front still work but i don't understand why this would now be a issue seeing as they where working ok before. any ideas what might be the problem the wiring on this bike is a mess someone installed after market indicators on the rear and different tail light. couldn't leave it un-fixed stripped all the rear wiring and rebuilt, i don't know who did the wiring but they shouldn't quit there day job. crimp connections and household electrical wire one hell of a bodge job.
  2. So bought a yam xt 125 x 08 on the 4/1/17, and so far so good its not a bad little bike for the price i paid. does what i need it for did come with the terrible speedo problem ie DEAD. Noticed its a issue with these bikes. That be sorted at a later date with a after market speedometer. but at this moment security is my main concern, other than big thick chain and disk lock i want to fit a alarm. i bought one of ebay (china special) but will do the job. As you can probs guess the instructions are pretty sparse. and slightly confusing no further detailed instructions online with regards to installing on a yam xt. ive got a slim/basic knowledge of motorcycle electrics. so wiring things like alarms up new to me, the alarm in question only has 8 wires to hook up simple enough. comes with remote start too, got most of the wires narrowed down to there functions (not wired up yet) but thought id ask for a second opinion. as to correct way to connect it up from some more people in the know. any help would be appreciated check twice, do once sort of thing XT 125 wiring diagram - http://i1237.photobucket.com/albums/ff467/freeston/20141118_221516_zpsg63xsnvh.jpg alarm wiring diagram - http://i1237.photobucket.com/albums/ff467/freeston/IMG_2273_zpsgu9hguva.png alarm - http://i1237.photobucket.com/albums/ff467/freeston/IMG_2278_zpsfetfaw1p.jpg
  3. Recently purchased myself a Yamaha, and what better place to join
×
×
  • Create New...