jackpollard6

Thanks for your help guys! And did you mean me a scrote? I was only asking for help as this is my first bike, classic bike anyway if it was not aimed at me apoligies

Thanks i dont know much about this bike and my dad us helping me with it but i wasnt to sure if i had bought the correct cdi my mate from work had the bike before me and made it into a trial bike got rid of most electics battery ect, and im doing it up atm the bike had a cdi in it but it didnt come with the bike as he needed for his other dt175 i noticed that his cdi was 6 wires so pressumed thats what i needed but come to think of it he didnt have all 6 wires frim the cdi connected so a gathered thats because he had taken the battery off and also no kill switch! I am going to fit one though. I got the bike home put the new cdi in checked for spark which it did the tried to start the bike which it did for about a second then nothing after 10 kicks! But i did notice fuel pouring out of the carb i think the float was stuck so i took it apart and cleaned all of it the little valve in the carb that the float pushes it in and out has a ridge on it could this be a problem sorry for any confusion just dont know much about bikes and trying to learn as i go thanks

Thanks for the reply! I will try that tomorrow and let you know cheers again

Hello my bike is only fireing on one cylinder right hand side put new plugs in and checked both plugs for spark and is all good any ideas? Looked in the manual but not sure what to check hope its not too bad! Thanks for any help in advance

Sorry i dont really know to much about bikes this is my first project and i have a manual but it only told me about 3 wires and red wire when connected had no spark? So i unpluggd it and it sparked as it should thanks for any help

Hello all bought my bike a few days ago and needs a good clean up but need to know some things first.... What cdi do i need i brought one of ebay didnt seem to start checked for spark and it did bright blue big spark! But noticed when i pulled plug out covered in fuel! I then noticed fuel leaking from carb i think the float was sticking so could this cause it to flood? Anyway it did start for a split second so does this mean i have the right cdi? It would not start at all after this!! 6 wire cdi btw but previous owner made into enduro so not all wires need to be connected also could someone tell me what wires to what colour wise?